I did my swap and when I tried to drive it around, the whole car shakes when I make a right turn. I got a new axle on the driverside. But when I took the old one out, the shaking stopped. Now with the new one in it is shaking again. Could this be a bracket problem? I had to weld the bracket for the manual tranny. Did anyone had this similar problem?
Announcement
Collapse
No announcement yet.
Tranny Swap problem
Collapse
X
-
Tranny Swap problem
Your car is faster, I'm the better driver
Greetz Erwin
My last ride
Shakes and Fidget - The Game
Tags: None
-
Yes I did. It shifts very well, but I can't get the power on the road because of the shaking problem.
Your car is faster, I'm the better driver
Greetz Erwin
My last ride
Shakes and Fidget - The Game
Comment
-
Anyone???
Your car is faster, I'm the better driver
Greetz Erwin
My last ride
Shakes and Fidget - The Game
Comment
-
I lifted the engine till it stood horizontal and in 1 line with the axles and then I welded the mount.
Your car is faster, I'm the better driver
Greetz Erwin
My last ride
Shakes and Fidget - The Game
Comment
-
Yep, the accord ones. Tomorrow IŽll relocate the bracket and that will probably fix the problem.
Your car is faster, I'm the better driver
Greetz Erwin
My last ride
Shakes and Fidget - The Game
Comment
-
I relocated the tranny bracket on the stock location and the shaking is still there. Can it be that my axles are to long? I've already got a new ball joint ond the left side and wheel bearings. The axles that I use are from the European Accord/Ascot because the whole platform is the same. Only the body is different from what I've heard.
Does anybody have some answers?Last edited by lo-specials; 02-11-2008, 03:50 PM.
Your car is faster, I'm the better driver
Greetz Erwin
My last ride
Shakes and Fidget - The Game
Comment
-
bro when me and MR PHIL did the 5speed swap we forgot to put
o of the bushings in the strut rod and it made like a clunking sound
strut rod= the bar that goes from the lower control arm to the front
the bar that u have to take out in order to take the tranny out
that bar has 2 bushings front and back check also on the drivers side
because u say its from the passengers side
thats where that bar is located at
Comment
-
Originally posted by PR CB7bro when me and MR PHIL did the 5speed swap we forgot to put
o of the bushings in the strut rod and it made like a clunking sound
strut rod= the bar that goes from the lower control arm to the front
the bar that u have to take out in order to take the tranny out
that bar has 2 bushings front and back check also on the drivers side
because u say its from the passengers side
thats where that bar is located at
Your car is faster, I'm the better driver
Greetz Erwin
My last ride
Shakes and Fidget - The Game
Comment
-
I've just looked at it and I can move them both for about 1 cm. Is that ok or don't they have to move at all?
Your car is faster, I'm the better driver
Greetz Erwin
My last ride
Shakes and Fidget - The Game
Comment
Comment