Brake lockup problems

[Puertorican_CB7]

So I changed the brake pads 2 days ago,today I smelled like something was burning,then I looked the front-right wheel and there was smoke coming out from it,DAMN, before that I noticed that when I was in Reverse, I let the brake pedal out and the car didnt move unless I hit the gas,this is why I only drive and
dont want to be a mechanic,anyway where did I made the mistake?? and Im about to sell it I need to get this fix this or my customer will go away

[FDAccord]

So I changed the brake pads 2 days ago,today I smelled like something was burning,then I looked the front-right wheel and there was smoke coming out from it,DAMN, before that I noticed that when I was in Reverse, I let the brake pedal out and the car didnt move unless I hit the gas,this is why I only drive and
dont want to be a mechanic,anyway where did I made the mistake?? and Im about to sell it I need to get this fix this or my customer will go away

strange. maybe bleed your brakes?

[HondaFan81]

Perhaps the whole reason you changed your brake pads was because of awkard wear/significant wear on them due to a seized brake caliper. However, you didn't notice the seize caliper or forced it back into the caliper somehow. Another cause could be not lubricating the caliper pins, which would cause seizure there as well. Another is if you really don't know what you're doing, you may have totally installed parts incorrectly without proper orientation and caused something to bind.

[wrichards2005]

Everything he ^^ said was true. But, my friend Phempa/Ben had the same problem one time, and all he did was get some better pads, and use the disc brake lubricant, and things were fine after that. Use that lube, and get some new brakes under your warranty. If not, it could be a bad caliper.

[Puertorican_CB7]

All right ill see what I can dig up,Thanks all