Question about wiring fans to switch (help)

[StoobyMcDooby]

Hey, if i hardwire both cooling fans to an ignition wire, and then to a switch, will that cause the a/c not to work because a module or something has been over ridden and over passed? thanks

[10thcb7]

ttt cause i wanna know too

[dirtyaccord]

nope it will still work..................had mine wired that way for bout 3 months

[StoobyMcDooby]

so if i have hardwired straight into the fan motors, the a/c system should still work just as before, right?

and secondly, if my a/c system is not working, and im pretty sure im low/out of freon, would that cause the compressor to not come on?

thanks a million guys

[10thcb7]

dude ac systems are compicated. It might be only a swithc or the clutch. I think there are no reman clutches for honda tho... that or you need compressor oil. take it to a shoppe. theyll find the leak replace the seal and check the rest of the system.

[10thcb7]

if you dont mind me asking wheres the ignition wire at ? so that i can do this too

[StoobyMcDooby]

there are many... usually wires that are under the steering wheel column. An ignition wire, by deffenition is a wire that has power when the ignition is on, and doesnt when the ignition is off.. The other choice is a hot wire, which has power at all times. To find an ignitio wire, find a test light, hook it to a wire that has no power when the car is off, and has power when the ignition is on. hope this helps