Announcement

Collapse
No announcement yet.

Squeaky Brake Caliper

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Squeaky Brake Caliper

    I was wondering what kind of lubricant I should use on my brake caliper slider pins and piston? The caliper squeaks when I release the brake pedal and think that would do the trick.

    #2
    you SHOULD'VE used that anti squeel compound recommend to put on the back of the pads!
    92 LX. A6 with GUDE bullfrog Cam. M2S4 transmission..Gutted H23 intake mani. The rest you will just have to find out!


    MR Thread:
    http://www.cb7tuner.com/vbb/showthread.php?t=174586
    My tribute page: http://www.cb7tuner.com/vbb/showthread.php?t=70489

    Comment


      #3
      my father always used white lithium grease to lube the bolt that holds the caliper to the bracket just be careful to not get that on the brake pad themselves or any of the braking surface.

      Comment


        #4
        Originally posted by Leung
        my father always used white lithium grease to lube the bolt that holds the caliper to the bracket just be careful to not get that on the brake pad themselves or any of the braking surface.

        EGG-ZACKLY white lithium grease is also good for Camshafts and some bearings..... VERY GOOD SHIT!

        but yeah...LEUNG is right...use that white grease...OR use engine oil for those caliper bolts! ( NEVER get it on the surface of the pads or rotors )
        92 LX. A6 with GUDE bullfrog Cam. M2S4 transmission..Gutted H23 intake mani. The rest you will just have to find out!


        MR Thread:
        http://www.cb7tuner.com/vbb/showthread.php?t=174586
        My tribute page: http://www.cb7tuner.com/vbb/showthread.php?t=70489

        Comment


          #5
          i used anti-seize...
          Seattle Silver crew #5
          Member of the Midwest Car Club.
          ..........2004 accord ex v6 - J30A4.......................... 91 accord ex - JDM H22A -- Long gone...

          Comment


            #6
            Originally posted by SN2BH22CB7
            you SHOULD'VE used that anti squeel compound recommend to put on the back of the pads!
            ^ I of course did that, I'm talking about the slider pins that the caliper rides on when it moves back and forth. I'll try some of the other suggestions, thanks.

            Comment

            Working...
            X