Changing the clutch on H22

[jdm91cb]

what's up guy, need help. sorry if this was answered already some were else but couldn't find it. i think my pressure plate went so i am going to change it this weekend i have the haynes book but just like to have info from any of you guys that have done this before. first time trying this, so want to make sure i get it right. thanks bro's

[NutBucket]

Pull the motor. It'll make life much easier.

[jdm91cb]

to much of a hassle plus the way the weather has been here in ny i would hate to risk it

[mayberry]

follow the haynes guide. its easier trust me. they know what they are talking about....it should tell you just to drop the tranny.

[jdm91cb]

i sure they are i have used it before but just checking to see if any of us have do it before thanks

[NutBucket]

Based on my experiences I spent less time pulling the engine then I did just pulling the tranny.

[jdm91cb]

thanks guy i will let you know what happen hopefully i wont f anything else up

[NutBucket]

The problem I was having was getting the right angle to drop the tranny out of the car. I mean, you really don't have to disconnect a whole lot more to just pull the engine.

[jdm91cb]

well thanks guys like i said me and my boy are going to work on it this weekend weather permiting going to put a light weight flywheel also i will let you know how everthing turns out. thanks again.

[h22sparkle]

to make life a little easier you may have to cut a little bit of the plascti before the electric fan so it can drop down with clearance u also have to disconnet the shiftlinikages if im not mistaken

[jdm91cb]

thanks H22 sparkle

[h22sparkle]

No prob dude