I happen to take out the axle that connects on the rotor..and now the car cant back out..not even by pushing..Did i unconnect the whole axle?
Announcement
Collapse
No announcement yet.
Car cant go in reverse..
Collapse
X
-
Well that would be the first thing I would check to see if its sittin flush with the trans. If not yea you coulda popped it out just try to pop it back in.
The New-ish Ride
My old Ride
Hear my Vtak!!!
MK3 Member #3
I piss off people for fun.
IA 08 Sunburn Victim #1
-
umm any disconnect in the drivetrain, from the wheel to the trans, will not able you to move. you shouldn't be able to move forward either without both axles attached. it seems there is something lodged against the hub. make sure you have nothing obstructing the movement of the axles/hub/rotor/wheel.
another question, is your handbrake released? i had to ask sorry!
Comment
-
Originally posted by NAiL05Well that would be the first thing I would check to see if its sittin flush with the trans. If not yea you coulda popped it out just try to pop it back in.
Originally posted by timmy0toolumm any disconnect in the drivetrain, from the wheel to the trans, will not able you to move. you shouldn't be able to move forward either without both axles attached. it seems there is something lodged against the hub. make sure you have nothing obstructing the movement of the axles/hub/rotor/wheel.
another question, is your handbrake released? i had to ask sorry!
Comment
Comment