I was looking for a FPR since my cheap ebay one broke! I noticed they have a AEM but i have a JDM H22a and it says it will require a AEM fuel rail, is this true? What ii am looking for is a FPR that is good, strong and can adapt to the stock position. Most other FPR wont mount to the stock fuel rail so can anyone help? Looking to buy one fast thanks
-
-
the B&M fpr is easy to install and isn't overpriced when compared to the AEM fpr. i'd recommend a fuel pressure gauge as well to help you set/tune the fpr.5.6L V8 32V DOHC
JDM HERITAGE - US BUILT -
Does it bolt right up to the stock position>? and is it true AEM fprs wont bolt to a stock h22 fuel rail?Comment
-
the B&M fpr requires use of the lower part of your stock fpr. i had a link to a site that had a DIY on installing this fpr but that link is dead now. but its real easy to do and it'll bolt onto either factory or aftermarket fuel rail.Originally posted by godsider
about the AEM fpr not working on the H22 fuel rail, i don't recall ever hearing that but i myself have never tried it nor see anyone with it on the OEM H22 fuel rail.5.6L V8 32V DOHC
JDM HERITAGE - US BUILTComment
-
the AEM one has issues clearing the manifold, if you want the aem i would get a remote mount one and run a hose from the rail to the FPR.
I do not have anythign nice to say about teh B&M rig so I wont say more on those.Last edited by v4lu3s; 08-04-2006, 06:54 PM.Comment
Comment