Stock Lip Bolt Sizing..

[xplode]

I know that its metric but is it a 10mm-14mm range? anyone know the exacts on it.. ztech i know you probably do.. i need it because im putting on a new lip and out of the 3 sets of sockets i think theyre all standard instead of metric.. the hondas are metric correct?

[91accord4door]

hondas metric,10mm.

[xplode]

you sure its 10mm for the front lip? good shit.

[91accord4door]

thats what mine was,10mm so i would say same for your,i have a 91 ex.they should nt change.good luck.

[xplode]

yeah. i assume its the same. i got a 5th gen.. not a 4th.. but im sure they are the same.

[91accord4door]

forgot you had the 5th.sorry man,but it is the same i believe.

[xplode]

ohh shit.. i meant what size socket i will need to use, i didnt mean bolt size.. What metric socket size?

[91accord4door]

ya 10mm,same for the rear lip.10mm socket.

[xplode]

nice man. appreciate ur help.. ima change the lip within a few days or so.. whenever i got free time.. yawn

[91accord4door]

cool,dont forget pics

[xplode]

yyeh. i got 2 new socket sets, standard and metric. the metric goes from size 4 to 13 i believe it is.. got em free, i got a hookup on toolz..

[mrhonda]

I'm sure most of you guys already know this, but for those who don't, the only sizes you will ever need for working on Hondas is 8, 10, 12, 14, 17, and 19mm.....thats it.

[Mista Juice]

well.. thats the most common sizes, but there are a few other misc. ones that you will need if you ever need to change certain parts..

[mrhonda]

Originally posted by Mista Juice
well.. thats the most common sizes, but there are a few other misc. ones that you will need if you ever need to change certain parts..

Aftermarket stuff maybe.....but these are the only sizes Honda uses.

[HondaFan81]

Originally posted by mrhonda
I'm sure most of you guys already know this, but for those who don't, the only sizes you will ever need for working on Hondas is 8, 10, 12, 14, 17, and 19mm.....thats it.

True...cept you forgot 36mm socket for driveaxle nut (at least on 4th gen Accords) I think our 88 Integra needs a 32mm socket for this as well.