See that green part? With all the silvery crap on there? Resolder all those parts and put a good amount on them.
Announcement
Collapse
No announcement yet.
No Fuel.HELP!!!
Collapse
X
-
The New-ish Ride
My old Ride
Hear my Vtak!!!
MK3 Member #3
I piss off people for fun.
IA 08 Sunburn Victim #1
-
When I was inspecting my main relay I noticed some littel whit stuff on the pin for the fuel pump so i took it out with a toothpick and it fired up,but now I have another problem.
When I start it up it goes to 3000 RPM's and down to 1000 RPM's and then back to 3000 RPM's and it just does this over and over,so if you could help me with this proble that would be great.Thanks
I just want to say thanks to everyone who helped me with this problem,YOU GUYS SAVED ME FROM SPENDING ABOUT 150 ON A NEW FUELPUMP.So I realy realy apreicate your guys's help.Thanks
Comment
-
Originally posted by SuperTuner12010When I was inspecting my main relay I noticed some littel whit stuff on the pin for the fuel pump so i took it out with a toothpick and it fired up,but now I have another problem.
When I start it up it goes to 3000 RPM's and down to 1000 RPM's and then back to 3000 RPM's and it just does this over and over,so if you could help me with this proble that would be great.Thanks
I just want to say thanks to everyone who helped me with this problem,YOU GUYS SAVED ME FROM SPENDING ABOUT 150 ON A NEW FUELPUMP.So I realy realy apreicate your guys's help.Thanks
hold on to your butts
Comment
-
Originally posted by hemlockzif the surge stops after you've warmed up the engine then its your IACV
theres a thread somewhere on here how to clean it....you should use ( AIR INTAKE CLEANER )...or ACETONE to clean the screen..
use Q-tips...!
NOTE: sometimes...depending if that IACV has NEVER been touched...those hoses are a BITCH to get off...so have a needle nose handy!92 LX. A6 with GUDE bullfrog Cam. M2S4 transmission..Gutted H23 intake mani. The rest you will just have to find out!
MR Thread:
http://www.cb7tuner.com/vbb/showthread.php?t=174586
My tribute page: http://www.cb7tuner.com/vbb/showthread.php?t=70489
Comment
-
Originally posted by SuperTuner12010Where is the IACV located on an A6?Thanks
you can't miss it...its got a black cylinder on it with a grey harness plug on it...and 2 hoses going in on both sides ( left and right )
its the same on the F22A4/A1 just you have ABS ( A6 )
I have a F22A4..... should all be the same!Last edited by SN2BH22CB7; 06-20-2006, 12:24 PM.92 LX. A6 with GUDE bullfrog Cam. M2S4 transmission..Gutted H23 intake mani. The rest you will just have to find out!
MR Thread:
http://www.cb7tuner.com/vbb/showthread.php?t=174586
My tribute page: http://www.cb7tuner.com/vbb/showthread.php?t=70489
Comment
-
Originally posted by SuperTuner12010Where is the IACV located on an A6?Thanks
Comment
-
Originally posted by oozingmachismo2just look at the intake mani. You cant miss it. If you do decide to change that out or clean it remember to bleed you cooling system after you finish installing the iacv. Otherwise you will have air pockets in it and it will run hot.
Yo Eugene...thanks for the addition of the IACV...forgot about that!92 LX. A6 with GUDE bullfrog Cam. M2S4 transmission..Gutted H23 intake mani. The rest you will just have to find out!
MR Thread:
http://www.cb7tuner.com/vbb/showthread.php?t=174586
My tribute page: http://www.cb7tuner.com/vbb/showthread.php?t=70489
Comment
Comment