cp mike had a bad no spark situation a while back, check for his no spark thread, because if replacing the dizzy with a new one didn't help, I'm a bit confused
Announcement
Collapse
No announcement yet.
Car starting problem again (no spark) =(
Collapse
X
-
Ronald. check ur ICM(igniter)unit.
1) check for battery voltage at the positive wire going to the coil, AND at the positive wire going to the ICM(igniter).
-- If you have battery voltage, see below.
-- If you don’t have battery voltage, check for an
open circuit between the ignition switch, the ICM, and the
coil.
2)Connect a voltmeter between the coil negative terminal
and ground, and record the cranking voltage two ways:
first with the wire between the coil and ICM connected,
then with it disconnected.
-- If you get about 8Volts with the wire connected and
10Volts with it disconnected, install a new coil.
-- If you get about 10Volts with the wire connected and
disconnected, install a new ICM.
there you go man. hope that helps a little bit. best i can do.F22a1-->F22A-->H22A-->auto-2-5spd-->K20 6spd-->F22C 6spd RWD-->4G63 6spd AWD-->K24 6spd????
Sold to: blackice, Myothercar, Rennat, Ilikebigbutts, HA91, DA92CB7, accord91lx, Cb7GHOST, Gemini, whiteaccord92,Warudakumi, jhondayaaj
Bought from: 93twodoorLX, Datmofo, g7kobayashi, accord_inspire, Accord SiR, Kurobei, UK-Accord, phreakish93, RENR, k-mart
Comment
-
you need to look into other things if you replaced the entire dizzy with a brand new one and you did the above and everything tested ok.
check ur timing belt out. make sure thats still in one piece. have you looked into ur ingition switch? the electrical portion?F22a1-->F22A-->H22A-->auto-2-5spd-->K20 6spd-->F22C 6spd RWD-->4G63 6spd AWD-->K24 6spd????
Sold to: blackice, Myothercar, Rennat, Ilikebigbutts, HA91, DA92CB7, accord91lx, Cb7GHOST, Gemini, whiteaccord92,Warudakumi, jhondayaaj
Bought from: 93twodoorLX, Datmofo, g7kobayashi, accord_inspire, Accord SiR, Kurobei, UK-Accord, phreakish93, RENR, k-mart
Comment
-
Originally posted by SMseagren83you need to look into other things if you replaced the entire dizzy with a brand new one and you did the above and everything tested ok.
check ur timing belt out. make sure thats still in one piece. have you looked into ur ingition switch? the electrical portion?
thanks for the help bro,i really appreciate it ,i'm bout to lose it
Comment
-
you keep us updated man, i really hate to see this car not running...
THEN: 1993 Accord 10th Ann. Ed.---------------------- NOW: 1996 Accord EX
My Ride thread
Flickr
Originally posted by d112crzyAnd it can only get better. That's the best part.
All I gotta really say is:
People of cb7tuner, this AUTO is NOT a joke. It has impressed ME, the hater of auto's.
Comment
-
damn, what were da chances of that, TWO bad coils
THEN: 1993 Accord 10th Ann. Ed.---------------------- NOW: 1996 Accord EX
My Ride thread
Flickr
Originally posted by d112crzyAnd it can only get better. That's the best part.
All I gotta really say is:
People of cb7tuner, this AUTO is NOT a joke. It has impressed ME, the hater of auto's.
Comment
-
lol, that sucked, but i'm more than glad she's running now, congrats and enjoy her
THEN: 1993 Accord 10th Ann. Ed.---------------------- NOW: 1996 Accord EX
My Ride thread
Flickr
Originally posted by d112crzyAnd it can only get better. That's the best part.
All I gotta really say is:
People of cb7tuner, this AUTO is NOT a joke. It has impressed ME, the hater of auto's.
Comment
Comment