Pinchng gas line?

[Maple50175]

Okay since im parting out my car i was wondering this.. since i have a full tank of gas in it how do i remove the manifold/fuel line/throttle body. Whats the saftest way i can remove these things without getting gas everywhere

Please let me know asap


So i can do it friday.

Thanks

[91accord4door]

ya just take your gas cap off,that will relieve full pressure,than you can drain it right from the tank.good luck.

[91accord4door]

really? when i did my egr ports i disconnected some fuel ines because i they were in the way and that relieved the pressure in those lines,(the lines going to the fuel rail).

[Andrew]

Don't be a moron, drain the fuel and dispose of it properly.

[accordztech]

on the fuel rail, there is a 10mm bolt. its close to the drivers side on the fuel rail...unbolt that and you have relieved the pressure.



you can either unscrew the BIG RED CIRCLED one or the other one that i was talking about...the one to the right of the pic, that gold bolt on the fuel rail

usually i put my car out in the street cause a few drops of fuel will go down.

but first de-pressure the tank, then the lines...thats the easiest