for all who auto to 5spd swap... you fogot something

[fast93accord]

well, i was adjusting my clutch pedal the other day, when i noticed there is a hole drilled in our floorboard, right were the clutch pedal hits the floor. I found a 5spd accord, and it had a special rubber bumpstop that goes there to limit pedal travel.
anyway i looked on our parts computer at work for this bumpstop. It was nearly impossible to find. they dont call it a bumpstop or anything like that. So i ordered what i thought was the right thing, and it turns out i got lucky and got the right part.
so heres the honda part # for this bumpstop
75891-611-000
its only about $2, and will prevent your clutch master cylinder piston to go in too far, and wont let your clutch pedal hit the floor...

[93EXaesthetic]

Pedal to the metal !!!!!!!!!!

[HondaFan81]

well, i was adjusting my clutch pedal the other day, when i noticed there is a hole drilled in our floorboard, right were the clutch pedal hits the floor. I found a 5spd accord, and it had a special rubber bumpstop that goes there to limit pedal travel.
anyway i looked on our parts computer at work for this bumpstop. It was nearly impossible to find. they dont call it a bumpstop or anything like that. So i ordered what i thought was the right thing, and it turns out i got lucky and got the right part.
so heres the honda part # for this bumpstop
75891-611-000
its only about $2, and will prevent your clutch master cylinder piston to go in too far, and wont let your clutch pedal hit the floor...

good look...so you converted

[cyclonus_cb7]

Good looking out fast93accord. I was trying to figure out which part/num. this was. I like the "authenticity" of the 5sp. for my previous auto.

Thanks for posting (too bad my local dealer wanted an extra dollar more - oh well)