do you have to remove bumper in order to remove headlights?

[kool92accord]

cause i wanna black out my headlights today, and i was wondering if i had to remove bumper to get to the headlights screws..let me know guys

[dohcvtec20]

yeah, you have to remove the front bumper.

[rebels]

You don't HAVE to.. but it makes it a lot easier to get them out. I remember the first set of JDM headlights I ever had (2 years ago) I let a shop install them (free of charge) and they didn't remove my bumper or body kit at all and still managed to get them in.

Save your self the time and remove it. There is a DIY on how to remove it if you have any questions.

[accrdpower]

You don't HAVE to.. but it makes it a lot easier to get them out. I remember the first set of JDM headlights I ever had (2 years ago) I let a shop install them (free of charge) and they didn't remove my bumper or body kit at all and still managed to get them in.

Save your self the time and remove it. There is a DIY on how to remove it if you have any questions.

i agree, it is MUCH easier to just take off the bumper. just make sure everything is lined up and all gaps are equal when u put it back together! this is where 2 people is a good idea.

[sleepysal]

i agree, it is MUCH easier to just take off the bumper. just make sure everything is lined up and all gaps are equal when u put it back together! this is where 2 people is a good idea.

Taking of the front bumper may sound dificult but it is a breaze get a friend to help. I did it by myself ( removal head light install, and bumper install) in about 20 min.

[kool92accord]

im goin to try to do it today. i thought taking off a bumper would be a b!tch..but i guess not

[rebels]

http://www.cb7tuner.com/vbb/showthre...ghlight=bumper

[JDM4DOORLX]

http://www.cb7tuner.com/vbb/showthre...ghlight=bumper

Same one I used, if you get confused, you can PM me only took us like 15 minutes the first time and now I can take it off in like 10 by my self. Just six bolts and a few small screws in the fenders.

[turboh22aakkord]

cause i wanna black out my headlights today, and i was wondering if i had to remove bumper to get to the headlights screws..let me know guys

yeah you do... but its tit... its only a few bolts and she pops right off... i ruined one of my stock headlights trying to take it out with the bumper on.. thinking it would be hard to drop the bumper... but when i droped the bumper i was like.. wtf.. im an idiot haha.. just drop it.. its simple.

[zelseman]

i tried using the "how to" write up, but it says to remove the bumper turn lamps, and theres no way for me to do that...i dont have a screw on the side of mine.

[accrdpower]

i tried using the "how to" write up, but it says to remove the bumper turn lamps, and theres no way for me to do that...i dont have a screw on the side of mine.

yea u do have a screw.....if your looking at the front of the car, it is on the inner sides of the markers.....bout 1-2inches in. can't miss them.

[i97supratti]

I have a question, might be offtopic. For the rear bumper, a bunch of clips hold the bumper down right? And when you pop the clips you cannot reuse them right? You remove the clips with pliers right? I wanna diagnose how bad the rust is back there, thanks.

[zelseman]

im looking and the only thing is see is maybe a screw inside the bumper on the light.

[i97supratti]

im looking and the only thing is see is maybe a screw inside the bumper on the light.

2 bolts at the top. Near the headlight area on the left and right. When you remove the amber cover, there are one under each of them. You might need an extension to reach them. After that it should come off.