knock, while driving and making a turn in motion.

[br0nx finest]

ok, when i first got my 93 lx it was making this sound as soon as i swapped over to the 02 se wheels, then it went away in about a month.

now, i've got the lude blades, as soon as i swapped wheels, it started making the noise again. it sounds like a fucking horse is galloping on the side of my car.

yes, i tighted all the lug nuts. and i have rear drums by the way.

any ideas?

[93accordexcoupe]

i think iamanonymus had a diy on something like this for his camber kit or the anchor bolts or something. check in the diy section

[br0nx finest]

i don't have a camber kit. and from the looks of things, i don't think i need a rear one. a front one, yes.

but what does camber kit have to do with the goddamn horse galloping?

[h22sparkle]

First off what size is the tire maybe your tires are rubbing against the chasis. Second of all nice coppin my style *****. Maybe your tires are out of round the tires are all the same are then not mixmatched right?

[br0nx finest]

1. 195/60/15 goodyear eagle h/p
2. i don't know how many times we're going to go over this, i don't like the fucking wheels. i got them from a trade, and could not pass them up because my left front tire on the 02 se wheels were showing the radial belts.
3. maybe but it sounds like a mechanical knock, i was thinking it had something to do with the rear drum. and yeah all 4 tires are the same.

[h22sparkle]

Your problem is simple they are the goodyear tires get rid of em my boy had the same problems with them shits. Your car isnt that low to have a camber problem but whatever what was the tire size on the last set of rims you had and is there any camber?

[br0nx finest]

Your problem is simple they are the goodyear tires get rid of em my boy had the same problems with them shits. Your car isnt that low to have a camber problem but whatever what was the tire size on the last set of rims you had and is there any camber?

these tires ride good besides that man. he had the same problems, what were the symptoms bro? i do have a camber problem in front, i also think i have a lower control arm issue, as my front left wheel sits too far to the rear.

can you take a look at it, or possibly recommend a solution?

[h22sparkle]

Take it to sears and have them put it on the machine to see if you have it the lazers will tell all and youll have a better look theres only but so much we can from here.

[F22-GURU]

Have a look at Your Outer CV joints. They will make a knocking/clicking noise on turning while accelerating. If the CV Boot is split the grease will fly out and will stuff up the cv joint.

[NOVAccord]

Yeah, if it makes noise while in a turn, it might be either cv joints or tie rod ends.....both are pretty easy, and cheap replacements as long as You have the equipment