No spark

[Bullhorn7]

Im getting fuel, the cam is turning, and I changed the ignitor out.. Whats left that can stop spark?

[dj_ender]

Coil, wires, plugs.

[Bullhorn7]

new wires new plugs. How do i check if its the coil?

[dj_ender]

External?

[Bullhorn7]

Internal

[dj_ender]

Ignition Coil Test (Fuel-Injected Engine)

1. With the ignition switch OFF, remove the distributor cap.

2. Remove the 2 screws to disconnect the BLK/YEL and WHT/BLU wires from the terminals A and B respectively.

3. Using an ohmmeter, measure the resistance between the terminals. Replace the coil if the resistance is not within specifications.
NOTE: Resistance will vary with coil temperature; specs are at 20*C (70*F)

Primary Winding Resistance (Between the A and B terminals):
0.6 - 0.8 ohms

Secondary Winding Resistance (Between and A and secondary winding terminals):
12,880 - 19,320 ohms

There ya go.

[Bullhorn7]

Awesome! Coil was Bad. It actually runs 10x better than it did lol thanks..

[dj_ender]