have a question about the clutch fork

[devstar66]

ok so i just put my tranny back on and noticed the clutch fork is pretty loose do any of u guys know if this is normal i havent put on the slave cylinder yet need to know asap

[thepowderblue]

Thats fine. After you bleed the clutch and all that it will go away

[batever]

.

[thepowderblue]

.

What?

[batever]

What?

I figured you knew what you were talking about from doing an actual clutch job, and since I didn't, I changed my comment to a single period. Faster than deleting.

[wed3k]

if it is bad then the ball on the tranny or the fork can be worn out. ive seen forks so worn out that they rattle at idle.

[Losiracer2]

make sure you lube the ball

[cb7 dohc]

if it is bad then the ball on the tranny or the fork can be worn out. ive seen forks so worn out that they rattle at idle.

My cb does the samething rattle at idel.

[nusdogg]

Yeah, it's normal for it to move cause the slave cyl hasn't put pressure on it yet.