WS2 Muffler offset. LT, RT or center?

[eazyduzit509]

Gonna get a new Muffler and have my N1 Muffler cut off its 2-1/4" piping. Which WS2 tip offset works on our CB's? Left, right or center??? Thanks.

[hondamanf22]

right

[eazyduzit509]

right

Is that what you have in yer sig? Hows she sound! The universal muffler itself is almost $300 shipped. The only thing im curious about is the inlet offset, i assume it should be on the right aswell (When looking at it from the back of the car), but i dont know how it comes, dosnt say... I will most likely have it put on at the muffler shop, i have access to a welder and know how to weld, but this guy is good...

http://cgi.ebay.com/ebaymotors/Apexi...Q5fAccessories

[eazyduzit509]

Ok, so im buying this tomorrow, ive seen the muffler TIP offset to the right and the INLET offset to the right... so, which is it? Inlet offset to the right? Why is this so confusing...

[eazyduzit509]

Anyone? Whats the offset, inlet or tip? Just want to be sure before i buy this.

[eazyduzit509]

Called Apexi and they said that the offset is refuring to the INLET, but, the guy im buying from on ebay says the RT means the TIP is offset to the right..... wtf.

[AccordWarrior]

I forget what the piping was into the muffler...but the tip itself was centered in the muffler.

I don't have any pictures from my archives about the front of the muffler (inlet piping)

[jdmwannabee]

300 is too much please take a look here...
http://www.shutokoengineering.com/default.asp

[eazyduzit509]

I forget what the piping was into the muffler...but the tip itself was centered in the muffler.

I don't have any pictures from my archives about the front of the muffler (inlet piping)

Thanks, i took a peek at the exhaust setup thread and saw that all the oval shaped mufflers were centered. Thanks!

300 is too much please take a look here...
http://www.shutokoengineering.com/default.asp

If i woulda known.... Already bought it.