Does anyone sell pistons for an F22A1? Bisi's site is not working for me, and i know those will be a fortune. if you guys could tell me some places to get pistons, that would be awesome.
-
Originally posted by scudweiser -
well i do know that ebay has some npr pistons with acl or king bearings(usually acl in my experience)
they are a cast piston(stock replacement) that i have had good results with
comes with rings sized to pistons,ex: 85.5 pistons come with 85.5 rings
http://cgi.ebay.com/ebaymotors/90-93...Q5fAccessories
am not sure if you are looking for forged or not
if you are looking for forged, give bisi a call or go to wiseco, or CP and see how much some pistons will cost to have made(about 500+ roughly from what i remember.)
there are some others but can't think of them -
I saw those pistons on ebay but didn't wanna trust them cause that sounds way too cheap. If you check out any O Reilly's or Autozone or NAPA store they'll be able to get you something in the stock replacement area. For forged I'd call Bisi since I think they'll be cheaper than Wiseco or CP.Comment
-
Huh. I spent the 929 on Bisi's forged rods and pistons cause I didn't wanna risk getting those and having them go out in a couple months. But I'm sure Bisi's will last way better if I turbo.Comment
-
i dont have an ebay account. and i meant to say pistons for an F22A6, dont know if that makes a difference, but ill give autozone a call in the morning. thanks guy!
Originally posted by scudweiserComment
-
the F22a6 pistons are identical to the others. The only differences are the windage tray in the oil pan a better cam, intake and exhaust manifold.Comment
-
i actually bought the same deal you are talking about, the ones with the longer rods.Originally posted by Sarthos View Post
929 that means you got the ceramic coating just like i did
the pistons that i recommended are strictly stock replacements nothing else
if you are planning on turbo i would NOT use those ones off ebay b/c the ringlands(weakest point on our pistons) will most likely go out in a couple monthsComment
-
I would *assume* that with the ebay ones on a turbo the ringlands might go out even faster than OEM pistons. Not sure.Comment
-
-
we still have some sets of the 9 to 1 pistons with longer rods, those are $769 shipped.
Depending on what you want we can work something for you, as far as I have seen there has been no issue running the pistons we have been offering.
On the other hand some of the Ebay Brands have issues simply attempting to install them. So at the end of the day you save some cash but you do not know whether or not they will hold up.
At least with our pistons you know that you have reliability and security whether you go with an N/A setup or a turbo setup!
If you want a set shoot me an email:
Randy@Bisimoto.comComment
__
Comment