opening door problem with lights

[kenjin]

recently something went wrong with my drivers door when u open it..when the door is open the seat belts move but the light on the door, the map light and also the light on the cluster doesnt light up..i opened the door with the key and my alarm doesnt go off too..any ideas??

[evil_demon_01]

Have you checked the fuses?

[kenjin]

theres a fuse for it?..is it locater under the dash??

[kenjin]

well my passenger sides works perfect though

[casterX]

check door sensor/switch..

[pedroalcala]

check the fuses next to the clutch pedal, also check for a blown fuse on the engine bay fuse box....

[Losiracer2]

yeah check the door sensor for the lights. Mine recently was sticking. It worked when I flicked it w/ my fingers but didn't when i open/shut the door. I just took it apart and cleaned it and put some silicone grease on it, now it works perfectly.

[kenjin]

yeah check the door sensor for the lights. Mine recently was sticking. It worked when I flicked it w/ my fingers but didn't when i open/shut the door. I just took it apart and cleaned it and put some silicone grease on it, now it works perfectly.

thats probably whats wrong with mine..i check all the fuse..couldnt find any blown one...any idea on how to clean it?

[Losiracer2]

thats probably whats wrong with mine..i check all the fuse..couldnt find any blown one...any idea on how to clean it?

you just have to take it apart, i think a phillips head screw undoes it. But be careful not to lose the spring. It'll probably pop out once you remove the phillips head screw. Just pay attention to how it came apart and put it back the same way lol

[JunyAccord]

yea i second the door switch. i replaced all 4 of mine and now they work spectacular. JY