Transmissions

[accordtypeR]

I was wondering if this setup would be able to work and what all do i need for it..

95 f22b1 SOHC Vtec motor and 90-91 AT tranny...i believe its the EX because it has the sport shift button on it..

[accordtypeR]

Hey someone help me out here..

[92accordkidd]

any f or h series tranny will work on every f or h motor

[92accordkidd]

use the search button before u ask a question

[accordtypeR]

use the search button before u ask a question

I did but it wasnt giving me specifics....thanks btw..

[Brandoncb7]

He has over 12,000 posts. I think he knows to search lmao.

[alkoholikwun]

manual tranny interchangeable for sure, but im never certain about autos.

[CB7Man]

The F22Ax and F22Bx had different flexplates and torque converters for autos
If you are using an F22Bx and you want to run an F22Ax tranny you need to pull off the F22Ax flexplate from the motor and bolt it to the F22Bx motor...tranny bolts up the same.

The reason they used different parts is for ease of timeing.
OBD1 engines such as F22AX...H22A/1 had the timeing marks on flywheel (Hence larger torque converter, so the timing marks on engine block can be used for either)
OBD2 F22BX, H22A4 had timeing marks on the Crank Pulley, so it didnt matter.
They could save money and downsize parts.

Also all 90-91 had sport shift...sport shift is in the computer. The tranny doesnt care it just takes what the computer gives it.

Just use a TCU that goes to your year pattern...90-91 or 92-97
90-91 is wired differently than ALL the rest. Other than that you can use 92-97 tcu's (96-97 Accords had a "Rigged" ECU that made it OBD2 compliant, however TCU's remained the same.)

If you have a 92-93 I have a P09 TCU that shifts at 7300
Might part with it...

[accordtypeR]

Okay i ended getting another AT tranny...now i have a problem with reverse...it shifts but the gear does not engage..it also makes a noise...im wondering if its the tranny, torque converter ??

[accordtypeR]

Update !!!!

Okay heres the deal when i was doing my engine swap last year i messed my tranny...the second tranny i got i was able to go into all gears except reverse...
So on Friday i bought another tranny ( New from JDM TECH ) now i only have 1st and 2nd gear....I NEED HELP and i need it badly... this is my only ride in my family right now !!!!