Announcement

Collapse
No announcement yet.

speedo not working and cel light on HELP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    speedo not working and cel light on HELP

    ok so about an hour ago i was driving to work.. and as i was exiting the freeway the check engine light came on.. i turned it off and turned it back on and my girlfriend noticed my speedo wasnt working its thr mph one.. and the last few days my speedo has been jumping around from 60-80.. i have an f23 manual trans with the f22a vss and its manual.. thr check engine light doesnt turn on when the car is idle but it turns on during driving and when i stop at a light the idle drops low.. but when i turn the car off then on the cel goes away idle goes fine but speedo still doesnt work.. can someone help me please.. btw my cluster is still working everywhere else.. and i have 91 sedan ex manual with f23 tranny.. please help me thanks.. and ive benn sitting in my car for about 10 minutes now with it turned on and the cel light wont turn on..?????
    MY FOR SALE THREAD


    My Recent CB

    My Old CBs

    1991 Honda Accord EX - MY NEW ONE
    1991 Honda Accord LX - Impounded and GONE
    1993 Honda Accord EX H22 - SOLD

    BTW IM NOT TURBO.. I WAS GOING TO GO TURBO WITH MY FIRST CB.. BUT IT GOT IMPOUNDED

    #2
    sounds like your speed sensor is bad or broken, this is very popular with most accords now a days.. idk why tho I've seen speedometers where the mph don't work but everything else does, that was electrical.. but most the time when somethings wrong with the speedometer it's the speed sensor and if you replace it and it still don't work it's electrical


    Originally posted by Juice21
    thnx pimpette, your car inspired me to go lower
    Originally posted by GameChewer
    Shiit i heard that, you heard the queen!

    Comment


      #3
      damn i hope its not electrical.. anyone else have any help or thoughts about this? thanks breeziebaby.. btw nice cb
      MY FOR SALE THREAD


      My Recent CB

      My Old CBs

      1991 Honda Accord EX - MY NEW ONE
      1991 Honda Accord LX - Impounded and GONE
      1993 Honda Accord EX H22 - SOLD

      BTW IM NOT TURBO.. I WAS GOING TO GO TURBO WITH MY FIRST CB.. BUT IT GOT IMPOUNDED

      Comment


        #4
        Speed sensor is the easiest to change if its a known good one. It takes two drive cycles for the CEL to engage that the Speedo is not owrking.

        The New-ish Ride
        My old Ride
        Hear my Vtak!!!
        MK3 Member #3
        I piss off people for fun.
        IA 08 Sunburn Victim #1

        Comment


          #5
          what do u mean? two drive cycles?
          MY FOR SALE THREAD


          My Recent CB

          My Old CBs

          1991 Honda Accord EX - MY NEW ONE
          1991 Honda Accord LX - Impounded and GONE
          1993 Honda Accord EX H22 - SOLD

          BTW IM NOT TURBO.. I WAS GOING TO GO TURBO WITH MY FIRST CB.. BUT IT GOT IMPOUNDED

          Comment


            #6
            anyone else? and what does two drive cycles mean concerning the vss
            MY FOR SALE THREAD


            My Recent CB

            My Old CBs

            1991 Honda Accord EX - MY NEW ONE
            1991 Honda Accord LX - Impounded and GONE
            1993 Honda Accord EX H22 - SOLD

            BTW IM NOT TURBO.. I WAS GOING TO GO TURBO WITH MY FIRST CB.. BUT IT GOT IMPOUNDED

            Comment


              #7
              yeah def. sounds like VSS. When I first swapped my 5spd from auto, I didn't have a VSS on the trans, I kinda rigged up a B series for the drive home til I found the right one and only my speedo wasn't working, the rest of the gauges worked fine. So i'm pretty sure thats your issue. Did you run the CEL yet? That'll tell you for sure.

              member's ride thread
              93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
              99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
              91 Accord SE 176k
              97' Honda Odyssey 199k miles...$485 spare van for my parents

              Comment


                #8
                well i havent checked the cel but i got a vss
                MY FOR SALE THREAD


                My Recent CB

                My Old CBs

                1991 Honda Accord EX - MY NEW ONE
                1991 Honda Accord LX - Impounded and GONE
                1993 Honda Accord EX H22 - SOLD

                BTW IM NOT TURBO.. I WAS GOING TO GO TURBO WITH MY FIRST CB.. BUT IT GOT IMPOUNDED

                Comment


                  #9
                  How can i check the cel btw.. since when i turn my car on it doesnt have the cel unless i drive the car and i let off the gas and stop thats when the cel will turn on
                  MY FOR SALE THREAD


                  My Recent CB

                  My Old CBs

                  1991 Honda Accord EX - MY NEW ONE
                  1991 Honda Accord LX - Impounded and GONE
                  1993 Honda Accord EX H22 - SOLD

                  BTW IM NOT TURBO.. I WAS GOING TO GO TURBO WITH MY FIRST CB.. BUT IT GOT IMPOUNDED

                  Comment


                    #10
                    Originally posted by CB7xTURBO View Post
                    How can i check the cel btw.. since when i turn my car on it doesnt have the cel unless i drive the car and i let off the gas and stop thats when the cel will turn on
                    once the CEL turns on, there's gonna be a blue connector near the passenger footwell. You're going to have to remove this triangular shaped plastic panel that clips in vertically just inside of the door. Then you'll see a blue plug. Simply short the plug with a wire and that'll allow the CEL to blink and give you the code number.

                    member's ride thread
                    93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
                    99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
                    91 Accord SE 176k
                    97' Honda Odyssey 199k miles...$485 spare van for my parents

                    Comment


                      #11
                      '04 member doesnt know how to check a CEL?

                      you got a part without even knowing the problem. This is amazing.
                      I <3 G60.

                      0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

                      Comment

                      Working...
                      X