Announcement

Collapse
No announcement yet.

speed sensor and install

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    speed sensor and install

    any one have a diy speed sensor install instructions and pictures to take out the old speed sensor and put in the new one? im having a hard time locating it..

    i have an h22a manual tranny
    Tags: None
    #2
    Hey man,
    I'm having the same problem, I found it it's located directly beneath the thermostat. As your looking at the engine with the hood up its immediately to the right of the far right corner of the valve cover, it's not the thing thats easy to get too...its below the thermostat with all the hoses coming out of it so we will probably have to take that out and I have never done that...so it could get bad lol

    I hope someone has a DIY on this for this engine and tranny, it looks easier on the others?
    So, is that what you call a getaway?
    Tell me what you got away with.
    Cause I've seen more spine in jellyfish.
    I've seen more guts in eleven-year-old kids.
    Have another drink and drive yourself home.
    I hope there's ice on all the roads.
    And you can think of me when you forget your seatbelt,
    and again when your head goes through the windshield.

    And is that what you call tact?
    You're as subtle as a brick in the small of my back.

    Comment

      #3
      its in the FAQ

      http://www.hondapitstop.com/accord/t...ed_pulser.html
      What makes me laugh about forums, is that no matter how much you try to help someone, they dont take the advice. Go ahead and do it the hard way.

      You got to respect what you drive, and appreciate what you have, making the best of what you got. and if that means putting CAI, HID's, a phat stereo system, and a idiot in the drivers seat...then so be it!

      Retro!

      Hater

      I love nooBs...They make me look good

      Comment

        #4
        http://www.cybertrails.com/~bestinth...tLocation.html

        Also try this one it helped me when I did it

        on the stairs, she grabs my arm, says whats up,
        where you been, is something wrong?
        i try to just smile, and say everything’s fine.

        Comment

          #5
          the one accordfair posted is the best one...its VERY informative, its hte one i used when i changed my VSS...

          Comment

            #6
            speed sensor and install
            any one have a diy speed sensor install instructions and pictures to take out the old speed sensor and put in the new one? im having a hard time locating it..

            i have an h22a manual tranny


            __________________
            i have an h22 accord

            Can i request the H22A manual if any from you? You can email it to me .

            Comment

              #7
              well yeah man...just look at those two previous posts with the hyperlinks in them..they both have pics.....but you have a h22 engine....i betcha the VSS is in the same place though as the f22's..good luck

              Comment

                #8
                yeah i dont know about the h22......erm if its the same as f22 maybe tomorrow ill get you some better pics. Im doing my a6 manifold swap tomorrow hopefully and am hoping to make a diy on it.(as if we don't have enough already, but hey they can use it or not)...hmmm taking a look at my chiltons manual it says procedures apply to 90-95 accords and 92-95 preludes, so I assume they are same or similiar.

                on the stairs, she grabs my arm, says whats up,
                where you been, is something wrong?
                i try to just smile, and say everything’s fine.

                Comment

                  #9
                  yeah that what i though...preludes and accords are basically the same thing, so i just figured it would be in the same place as our f22 engines....although the sensor is actually mounted on the transmission..but whatever..im sure you will figure out how to change it..its not hard at all....you just need A LOT of light down there so you can make sure you get that pin back in the hole, and make sure you get the actual sensor lined back up right..but is simple

                  Comment

                    #10
                    i finally installed mine.. i didnt know exactly where it was at first.. its more like i stumbled into it.. i noticed that the whole shit was loose and i actually took the whole thing out.. the sensor and what it was attached to... i looked at the whole thing and i noticed the bracket that bolts on to the tranny broke.. thats why it was all effin wiggling n shit..

                    but yea i replaced the old one anyway and put the new one and i put the whole piece of shit back into place.. but i gotta get some jb weld or something to fix that bracket that cracked..

                    edit: ide do a diy on it... but man that shit was bitch to do.. my back started hurting lolz... if it wasnt for that broken bracket i would of been there all night..
                    Last edited by SsdAccord; 12-08-2004, 11:49 PM.

                    Comment

                      #11
                      i didnt even put the bracket back on mine when i installed a new one.....and im not having any problems.

                      Comment

                        #12
                        For your guys info, if you couldn't find the VSS of H22A, u also can use the VSS of Civic EGs. I use the Civic EG's VSS for my H22A and its work.

                        Comment

                        Previous template Next
                        Working...
                        X