I need a Diy For a window motor/regulator replacement

[4drcord]

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
As stated above Bro hams

[mayberry]

its like 4 bolts dude, u just gotta have the window lines up right iwth the holes in the door to get to them. its really easy. BE A MAN!!!! lol

[tommi]

if you need to just try and remember how it goes back together is how i did it and always ALWAYS make sure u have lined it up correctly or u will b spending an ass load of time wasted by adjusting it and oh one more thing while ur at it check your run channels (rubber seals) to see for any cracks or tears.

COLBALT CB7 2NER

[mayberry]

^^^^^^^^^^ wut he said.

[deevergote]

Yeah. Took me like 3 hours the first time to do it... Not because it's hard, but because I was being REALLY careful... Just watch the glass and you'll be good.

And if you haven't gotten the new regulator yet, BUY A TRUE OEM REGULATOR!!! I got my driver's side from 1aauto.com, and it doesn't fit right... it's a pain in the ass, and embarrassing at the gas station.

Have a magnetic screwdriver handy too... Dropping the screws inside the door can be a bitch. And you probably will drop one or two down there.


Just look at the regulator, understand how it works (chilton's or haynes help a little) and just match it up with the holes. Which one is it? Rear is easier...

[tommi]

Originally posted by mayberry4thgen
^^^^^^^^^^ wut he said.

[4drcord]

thanks alot guys