got breather filter need help with old hose

[J3wman]

How do you remove the hose that goes to the crankcase now i got a breather filter there but it appears to be attached to a coolant line, how do you get rid of this hose?

[J3wman]

cmon someone has to have a breather filter here

[J3wman]

help?

[Whutface]

Just pull it off....

[ibr_adam09]

i know there like no one on the boards,

ther should be clips that you press in and move away from the ends

then you just pull on the hose till it pops off
it could be alil light because its on there for so long

IMO i had a breather but it spit out so much oil (1/8 qt of oil every week i assume )

that i threw on back my old pipe , i did not notice any difference at all and it wasthe worst 7 bucks i spent

its good for looks i guess

[benji]

Easiest thing is to just leave the metal tube part and just take off the rubber hose from both sides. Be sure to plug off the hole on the intake, otherwise you will have an unfiltered entrance for dust/debris.

[nostringz]

lol sorry for the late response. track the hose for the intake and remove that ONLY. leave the coolant line alone. you can take that coolant piece off by re routing it, but that's a little messy.

[civic_90_08]

Or, you can set up a catch can..

[1991f22a1]

when i did mine, i just got a new peice of hose. took the whole metal thing off, and put the filter on. simple as that.

[cb7_07]

i just leave it there. lol

[J3wman]

what size hose is that?