i need to change my front rotors. i can doo everything except pressing them off/on. were do i go to have this done? how much does this cost?thanks.
Announcement
Collapse
No announcement yet.
pressed on rotors.(front)
Collapse
X
-
Originally posted by alb_accord
dude i don't kow why people make it to be so hard
its not hard at all.
tomorrow i will get some pic of the tools that i used and i will show u what to do
its very simple. it won't take u more than 2 hours to do it urself.
Comment
-
shit my camera isn't working.
all u need is a oem slide hammer. a axle puller. a 11 spoke socket and the 36mm socket.
take the axle bolt off.
losen with only half of the turn the bolts that hold the hub to the rotor. then with the 11spoke socket #10 socket try to take off the 4 bolts in the back. u got to move the steering wheel around for a bit.
then after u take those bolts off
put the axle puller where the wheel goes int. but two of the bolt that keep the wheel inthe wheel assably. slide in the slide hammer. 5 of 6 shots. and the rotor is out. take off the hub. insall the new rotor (backstep) make sure u don't tight these front bolts too mcuh(one of mine broke)
make sure u clean the rotor with brake cleaner before u put the brakes in. make sure the rotors are clean(othewise they will burn)
and u good to go.
2 hour job. don't hit with hammer don't take off the wheel assambly.
as simple as thatare we there yet are we there yet are we there yet
Comment
Comment