Wire Tuck Project

[byc_cb7]

okay last wedekend i got in some trouble wit the law so now my car is siitin.. so while its sittin im goin to try to get a mild wire tuck done...things i wanna know is where to run the wires thru. do i cut my own hole or run it into the firewall and out by the door where the other whole is already at????? another question i have is i think i wanna tuck the fuse box into the glove box but i need to know what is neccesary to make this happen. i know aleks has done it and some other tuners..if ur readin this thread please post..prodress i have is front bumper, and fenders off. all the wire is out and unplugged now i need to know where a good spot is to run it. ill have some pics later...thanks in advance.

[ExCoupe92]

I know at least for the passenger side wires it's straight forward. You do need to drill a hole behind where the fuse box sits in the stock location and run wires through there, up your fender. Keep most of the loom from your wires so you can wrap them again on the other side. Tucking wires is just relocating them.

As for the fuse box idea, I'm not quite sure.. some one else chime in?

[oneoffaccord]

[cp]mike i think did a writeup/diy. check it out. i would recommend getting a wire diagram or a helms manual.

[byc_cb7]

here some pics of what ive done. would of posted them sooner but been busy.

[byc_cb7]

ok its been a while but i finished my mild tuck. i havnt posted cuz of christmas and all but here's some pics.

[byc_cb7]

i guess no one likes it

[dannyd]

Looks good, so far. i am scared when it comes to wiring, so mad props for you.
Regarding the fuse box, i believe it's somewhere behind the glove compartment.
Check oneoffaccord, he's done it.

[nusdogg]

Looking good man, Keep it coming. Wanna see the outcome. GL.

[evil_demon_01]

Looks good man

[civic_90_08]

i like, im going to be doing this with my next car. I hope a 92 sedan. but, while i have my engine out, im going to start tucking and getting rid of some things.

-Jordan

[KeeleDesign]

if you look at my rides page, you'll see a long and painfull ride to my wire tuck,
my first page has an index showing the page it starts on if it'll help you any.
http://www.cb7tuner.com/vbb/showthread.php?t=75529

[oneoffaccord]

i left my fuse box under the hood...it thought about moving it inside but i was lazy..haha..


i would get some wireloom to cover those exposed wires. now start removing your p/s, cruise components and move the battery and your off to a good start

[byc_cb7]

Looks good man

thanx some one finally commented

i like, im going to be doing this with my next car. I hope a 92 sedan. but, while i have my engine out, im going to start tucking and getting rid of some things.

-Jordan

that would be best while then engine is. u'll have more room

if you look at my rides page, you'll see a long and painfull ride to my wire tuck,
my first page has an index showing the page it starts on if it'll help you any.
http://www.cb7tuner.com/vbb/showthread.php?t=75529

thanx ima look into it

i left my fuse box under the hood...it thought about moving it inside but i was lazy..haha..


i would get some wireloom to cover those exposed wires. now start removing your p/s, cruise components and move the battery and your off to a good start

yea thats next but, i need a lil help wit the p/s.ive read something about about u have to run a hose back into the pump.idk not sure but i'll check it out.. thanks again for the comments . peace