Announcement

Collapse
No announcement yet.

inside the infamous igniter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    so that makes the car stalls and really hard to start when the car is hot?
    You Can Catch me Ridin In My CB Eyes On The Rearview Lookin For The Police

    Comment


      #17
      Originally posted by hondaguy305 View Post
      so that makes the car stalls and really hard to start when the car is hot?
      from my experience, once the ICM is out, it usually is done forever. the ignition coil can cause the car to stall and harder to restart as well. ive only experiened the main relay thing once but never has it affected it me during driving.
      I <3 G60.

      0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

      Comment


        #18
        Originally posted by hondaguy305 View Post
        so that makes the car stalls and really hard to start when the car is hot?
        My experince is that the engine will just cut off completley dead with no warning, or will cut off and on a few times before cutting dead (the tach will also go dead when this happens, and if the engine is cutting off and on the tach needle will drop to zero then bounce up each time the enginge stops and starts), and may then restart in a few minutes, or a few hours, or maybe tomorrow. In the end it will stop and refuse to start at all.
        Regards from Oz,
        John.

        Comment

        Working...
        X