opinions on clutch and flywheels

[slick]

but dont i need to if i get the esp mounts? i will have 2 other guys helping me.


and i found out those darn nuts for the top of the intake manifold suck getting them off so i guess getting them back on would be twice as worse

[wed3k]

take it off at the head and just leave it all one piece. ive done the rear motor munt twice and you have to take the intake manifold off. it sucks but you gotta do it, i actually had to raise my idle to 900 because anything under would rattle my car too hard.

[slick]

ok cool. so how is this clutch and flywheel combo? since is exedy do you think i still need to buy a oem throwout bearing

http://cgi.ebay.com/ebaymotors/ws/eB...m=350106858721

[slammed4thgen]

take it off at the head and just leave it all one piece. ive done the rear motor munt twice and you have to take the intake manifold off. it sucks but you gotta do it, i actually had to raise my idle to 900 because anything under would rattle my car too hard.

no you dont.

all you have to do is get an 18" extension or so and you can get it

then for left front bolt take of tb and wha lah.

so simple even a caveman can do it.

[slammed4thgen]

ok cool. so how is this clutch and flywheel combo? since is exedy do you think i still need to buy a oem throwout bearing

http://cgi.ebay.com/ebaymotors/ws/eB...m=350106858721

decent, and yes i would just to be sure

[slick]

no you dont.

all you have to do is get an 18" extension or so and you can get it

then for left front bolt take of tb and wha lah.

so simple even a caveman can do it.

how much does an 18" extension cost? i think my little 4 inch or whatever it is was like 9 bucks

[slick]

decent, and yes i would just to be sure

thats what i need something oem since i am not putting alot of power down now.

[F22HB]

ok cool. so how is this clutch and flywheel combo? since is exedy do you think i still need to buy a oem throwout bearing

http://cgi.ebay.com/ebaymotors/ws/eB...m=350106858721

That's what I bought. Used the tb that came with it. Its been good for about a year now. I'm pretty light on throwout bearings though, and I greased it up good. oem would be worth it.

[slammed4thgen]

thats what i need something oem since i am not putting alot of power down now.

however, 300 or so(with oem bearing) seems like a waste when you could do the clutchmasters from corsport for 340 or 360 shipped and use it later

and im not sure how much it is but it is worth the money lol

it really saved my ass when doing the rear mount of the esp kit.

get it, i promise you will thank me!

[slick]

does it come with grease? what kind do i need to buy if not? which by looking at the pic it doesn't

[slammed4thgen]

oh and do you have a hoist?

[slick]

however, 300 or so(with oem bearing) seems like a waste when you could do the clutchmasters from corsport for 340 or 360 shipped and use it later

and im not sure how much it is but it is worth the money lol

it really saved my ass when doing the rear mount of the esp kit.

get it, i promise you will thank me!

i cannot find the clutch on corsport. they only have preludes on their site and i still didnt see it there even though i know i could use the prelude one now

im on a tight budget and the kit is only 248 shipped with a lightweight flywheel

[slick]

oh and do you have a hoist?

nick said he was bringing his

[The G-Man]

does it come with grease? what kind do i need to buy if not? which by looking at the pic it doesn't

You just use random chassis grease from the parts store.

[slammed4thgen]

i cannot find the clutch on corsport. they only have preludes on their site and i still didnt see it there even though i know i could use the prelude one now

im on a tight budget and the kit is only 248 shipped with a lightweight flywheel

under 92-96 prelude

and your broke because you get flash, not get goods lol