Stainless steel clutch line

[bruno8747]

I have been looking around for the elusive stainless steel clutch line. I am looking for the one that replaces the factory hard line and goes straight to the clutch slave from the clutch master.

If no one makes the line still, does anyone have the specific fitting used and where to get the fittings.

[lokuputha]

ask Reason, he is selling the clutch lines

http://www.cb7tuner.com/vbb/showthread.php?t=91529

[blackcb7]

I have been looking around for the elusive stainless steel clutch line. I am looking for the one that replaces the factory hard line and goes straight to the clutch slave from the clutch master.

If no one makes the line still, does anyone have the specific fitting used and where to get the fittings.

Fittings and lines you can get at www.summit.com, as for the size I am not sure. Only person i saw that completed this was oneoffaccord. might want to pm him

[d112crzy]

Best bet would be to get a hardline from the junkyard and go to a shop and get the right fittings to get the line made.

[bruno8747]

ask Reason, he is selling the clutch lines

http://www.cb7tuner.com/vbb/showthread.php?t=91529

Thats NOT the line I want, I am looking for the one that replaces the hard line and the soft line, eliminating the clutch damper. I know the line exist because I've seen it done before but I haven't seen it in a long time.

[stewie]

i have it

i used to have a direct SS line, but found that it was leaking...so i replaced it with a direct hard line...works just as well...just not as pretty...

[bruno8747]

i have it

i used to have a direct SS line, but found that it was leaking...so i replaced it with a direct hard line...works just as well...just not as pretty...

Where did you get the line from? Do you happen to know?

[stewie]

yes, i do know, it was from a automotive shop called MOPAC, i believe the line is a -8 (dash 8) i THINK.....

but i noticed it kept leaking through the line...small crack in it or soemthing...so i had it replaced with a direct hard line, straight from the master to the slave....its kinda cool...you can feel the clutch vibrate while your stopped...you have a WAY better feel for the clutch...i like it a lot.

to have the ss line replaced with a direct hard line cost me 30$ from my mechanic.

[wed3k]

it would be easier if you just custom made it.

i think jei from blacktrax made one for a h22 swapped 5th gen. seen it in person, its pretty tite.

[ceelooboob]

http://www.cb7tuner.com/vbb/showpost...&postcount=963

http://www.cb7tuner.com/vbb/showpost...&postcount=968

oneoffaccord made something like what you are talking about.