Important Electronic Question

[JDMcb7accord]

Ok, sorry if this question has already been addressed, and this is the first time I have ever gotten in to anything this deep as far as working on cars. But it is a great learning experience for an 18 yr old, but anyways, I think the harness is just a little reversed between the f22 and this new h22, it is a 92 motor and it the jdm h22a if that helps for anybody
so here is my question, the wires in the first picture are supposed to hook up to the wires in the second picture correct? now if so, the acctual connections are different, now could someone show me some pictures of how you did this??

PICTURE #1


PICTURE #2


Thank you so much everyone

[aero]

You are going to use the accord wiring harness, and make it fit the h22. read that...

http://www.cb7tuner.com/vbb/showthre...&threadid=5423

[JDMcb7accord]

Ok, if I do have to use the F22 harness, that really sucks, because I have to pull the motor back out, unless someone has any ideas of how to get the harness off any other way, but, on top of that, all of the VTEC solenoids and everything will work with the F22 harness then, is that what everyone is getting at here?

[Slateboy]

For someone who is 18, your hands are really old.

[JDMcb7accord]

lol, those are my dads hands, I had him hold the wires up

[aero]

you shouldnt have to take the motor back out. it will just take some time and patience... i think but yeah, you use your regular harness, read the link that i put in my last post, and you use a few different plugs, attach the wires, then run 4 more from the ecu plugs. and then your done!