Announcement

Collapse
No announcement yet.

h22 spits and sputters

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    h22 spits and sputters

    hey guys i got another question i got a h22 swap and the dam thing spits and sputters. i am currently useing a 90 accord stock fuel pump could this be why? and what is the fuel pruessure for the h22?
    http://www.myspace.com/ilovevee

    #2
    Fuel pressure should be around 38 psi at idle.

    How's the timing, got the firing order correct?
    My unupdate website Speedworx-online.com, lol. <click here>.

    Comment


      #3
      make sure you didn't cut any injector wires when dropping the engine!!!


      05' S2000 GrandPrix White

      93' Accord (Sold )
      JDM H22
      Port n Polished Int Mani
      Bored TB, maxed
      MSD 6A
      I/H/E
      no cat
      [[-]] (()) [[\]] [[)) //\\

      Comment


        #4
        4 real
        My unupdate website Speedworx-online.com, lol. <click here>.

        Comment


          #5
          spits

          it's code 22 vtec pressure switch and i just changed it out and it still does the same thing
          http://www.myspace.com/ilovevee

          Comment


            #6
            Check your wiring, Vtec pressure switch doesn't have anything to do with the engine miss but it could be attributed to improper wiring if the same problem persist after replacing the sensor. I would check all of your ECU pins to make sure they are all in the correct place and properly seated.
            My unupdate website Speedworx-online.com, lol. <click here>.

            Comment


              #7
              thanks

              okay i will do that thanks busted
              http://www.myspace.com/ilovevee

              Comment


                #8
                iacv
                ecu
                wires
                is there an aftermarket FPR???

                does it sound like a subaru?? lol burbles???
                welcome to the DOHC-side..muuuahahahahahah




                http://www.cb7tuner.com/vbb/showthread.php?t=1906

                Comment


                  #9
                  okay i put the stock ecu back ion and it works fine now it doesnt spit or sputter but now it does that dam surging bs it rev up and down any one know how to solve this problem?
                  http://www.myspace.com/ilovevee

                  Comment


                    #10
                    Check your ecu make sure its a p13 not chipped. Then check your sparkplugs,distributor, do you have the prelude injectors in the rail or the accords,make sure your wiring is correct and your timing is on point.

                    Comment


                      #11
                      i am getting ready to clean the iacv today i will post another response after wards
                      http://www.myspace.com/ilovevee

                      Comment

                      Working...
                      X