Alright so I know what parts are needed errr what the guide/faq says for a manny conversion. My question is this: I can pick up these parts off a 92-96 lude in new condition although no pictures. The only thing I left out were the axles and ecu and engine 
Car is going to be a 90 accord auto, going to hopefully manny h22.
Here is the list of parts:
clutch pedal bracket
throttle cable
rubber tranny mount
2 slave cylinders ( used) *I know I only need 1*
shift boot
Starter bolts
front tranny bracket
spring for clutch pedal
motor mountsenergy suspension rear mount insert
brake pedal
both clutch switches
clutch master cylinder reservoir (used)
flywheel cover
gas pedal
clutch pedal
shift lever
flywheel bolts
Also there are a ton of little pins bolts nuts etc also all new from honda
linkage
Shipped for 160.....help me out guys
--------------------------------------------------------------------------------
Ken
Car is going to be a 90 accord auto, going to hopefully manny h22.
Here is the list of parts:
clutch pedal bracket
throttle cable
rubber tranny mount
2 slave cylinders ( used) *I know I only need 1*
shift boot
Starter bolts
front tranny bracket
spring for clutch pedal
motor mountsenergy suspension rear mount insert
brake pedal
both clutch switches
clutch master cylinder reservoir (used)
flywheel cover
gas pedal
clutch pedal
shift lever
flywheel bolts
Also there are a ton of little pins bolts nuts etc also all new from honda
linkage
Shipped for 160.....help me out guys
--------------------------------------------------------------------------------
Ken
