Project: butt dyno

[almostJDM]

Ok I got my flat faced valves form skunk 2 in today, woots and I wanted to see how they compared to the stock F20B valves, and I found a few interesting and cool things. the exahust valves are the same diameter but the H22 intake valves are like .25 mm bigger i dont know if there even that cause of the gunk build up on the F20B intake valve.

I'll take a few pictures when i get off work tomorrow morning.

[fatboy1185]

yay for pictures

[almostJDM]

Ok heres the pix finally lol ive just been too busy ,I also just orderd a complete block seal/gasket overhaul kit and a new thermostat. I'm still waiting to hear on new oem .25mm oversized f20b pistons which I hope word will come soon.

intake valves:



Exhaust valves:

[fatboy1185]

mmmm shiney

[almostJDM]

Pistons: OEM .25mm oversized Dohc F20b pistons(mabye not the guy im getting all my maintainance parts for my f20b from is having a hard time getting some so if this next attempt fails ill be getting stock bore pistons)
Cams:undecided
Skunk 2 high compression valves Recieved
Valve Springs: undecided
retainers: undecided
cam gears: undecided
intake manifold: Euro R Ordred
Throttle body: S2K
Exhaust: Undecided(either Greddy Evo2, RS*R Exmag, or Apexi WS2

[fatboy1185]

hurry up all ready!!!

[almostJDM]

Pistons: OEM Dohc F20b pistonsOrdered Will arrive in 6 weeks
Cams:undecided
Skunk 2 high compression valves Recieved
Valve Springs: undecided
retainers: undecided
cam gears: undecided
intake manifold: Euro R Recieved
Throttle body: S2K
Exhaust: Undecided(either Greddy Evo2, RS*R Exmag, or Apexi WS2)

[foamypirate]

Pics of the Euro R or ban!

[fatboy1185]

i've already seen it

[almostJDM]

Pistons: OEM Dohc F20b pistonsOrdered Will arrive in 4 weeks
Cams:undecided
Skunk 2 high compression valves Recieved
Valve Springs: undecided
retainers: undecided
cam gears: JUN Recieved
intake manifold: Euro R Recieved
Throttle body: S2K
Exhaust: Undecided(either Greddy Evo2, RS*R Exmag, or Apexi WS2)

[almostJDM]

ok i got bored today so i decides to mess with my dads Nikon D70s and took some pix of my Euro R mani

[almostJDM]

UPDATE!!!
Ok peeps time to update you on my build more so on the parts ive ordered



Pistons: OEM Dohc F20b pistonsOrdered Will arrive in 4 weeks
Cams:JUN 3's ordering when i get off my 7 days off next friday
Skunk 2 high compression valves Recieved
Valve Springs: JUNOrdered
retainers: JUN type 2'sOrdering when i get off my 7 days off next friday
cam gears: JUN Recieved
intake manifold: Euro R Recieved
Throttle body: S2K
Exhaust: Undecided(either Greddy Evo2, RS*R Exmag, or Apexi WS2)

[almostJDM]

pictures

as i stated b4 when i first started this thread saying that this is a full car build not just and engine build heres some pix of and exterior piece and my jun cam gears


came off an ascot, chassis SM3

[Grumpys93]

very nice build you got here. Ive always liked your car

[almostJDM]

ok I have a little bit of an update due to the accident i was just in i wont be getting any valvetrain besides the Jun valve springs i just ordered, well i cant say i wont but just not yet im gonna work alot of overtime so that i am able to still get the cams and retainers, so im hoping i can have it complete by august, but the engine will be running in a few weeks 100% sure , so ive focused on the external bit of the car and am almost finished buying parts, just have one last bit to get if i can find them, also im debating on wether or not to install the jun valvesprings with the stock cams, because i though i read somewhere that you can shatter your cam doing this, if im wrong then tell me and ill install em once they get here, and my combustion chambers have been fixed and valve seats cleaned, now i just gotta clean the seat area on the valve, then i gotta buy some assembly lube, oh yea and the euro r mani bolts onto the f20b head no mods needed besides the air injection holes, and the nipples but im gonna grind a tad in the top just to be safe and just incase they contact once they get hot