Okay my uncle has has giving a spare motor out of a 91 ex accord that was a automatic and I stripping it down to a bare block and I plan on doing a H23 head swap and getting it bore .3mm and run arias h22 pistons and f22 rods with delta regrind 272 cams is this possible and what gains will I be getting out of it oh yea do u think ill b able to go turbo P.S. add anything that you think will help with this project Because I bet my uncle that I can beat his nova he's building for bracket racing and I plan on calling him out for a grude match to shut this chevy verus honda agrument we got going on hopefully i'll burn him with this project beast
Announcement
Collapse
No announcement yet.
project beast frank motor
Collapse
X
-
why do you want h22 pistons? arias make pistons for f22's...86mm bore.
if your uncle has any decent setup, if it can hook, it will smoke the shit out of any accord setup on the strip. sorry to say that but it is true.
anyways, you may be better off going turbo for more power. N/a just wont cut it on a drag unless you juice like whoa.
basically you want a bullet proof bottom end with coated everything because you want to elminate the heat. you'll make power with a good amount of headwork.
not to disappoint but take it to the twisties, you'll stand more of a chance.
Comment
-
theres nothing wrong with boreing ur block to 87 mm if u wish ...its been done lots of times... ive seen h22 bored to 89 and 90mm and if you want to use f22 rods and cant find them at a resonable price just get h23 rods both r the same ....or why not just find u a closed deck h23 block have it sleeved and go from there .....the only advantage of the f block is the sleeves it has steel sleeves and the h series motors have fmr coated sleeves so if ur gonna build and u have to start from scratch just get an h23 block ,unless u just want the f22/h23 for the novelty of the frank motor and if thats the case h23 block h22 head........jus my 2 centsF22A1:blew up
F22A1/H22:blew up
F22A6/H22: " "
F22A4/H22: " "
H23A1 boosted:blew up
H23A1:traded
H23A1/H22 built:still in progress (getting my feet wet)
drive it like you stole it
FCB7(FRANKENSTEIN CB7 CLUB)
Comment
-
Wed3k what i mean is will bisimoto let me mix match part h pistons and f rods but idk im starting to think that the f22a spec pistons with the 1mm over bore will be better
Minoreparations no i personally dont think he can beat me because he is shooting for 7's in the 1/8th and im trying to race him in the 1/4 so im hoping that he redlines bad before then im trying to get my car to run high 12's or low 13's in the 1/4
P.S. I'm shooting for 250- 275 whp all motor this going to be a track car as soon as i get another accord this just a starting plan planning on having the motor done by spring of next yearLast edited by Bigsim05; 10-05-2007, 02:51 AM.
Comment
Comment