my first h22 swap.

[93_EXR.]

well started last week. thursday night. Took the motor out no problem then called it a night.

Friday night put the tranny/clutch/flywheel on the h22..

I took the motor out thru the bottom because i'm doing new drive shafts aswell. and its just easier.

and i didn't touch the motor all weekend and last night tuesday. put the motor back in all the mounts were on.

but the shift linkage was on the wrong side of the rear mount.. soo we pushed it thru the right side just by removeing the rear mount. and then as my friend was makeing sure all the mounts were tight stricked one of the tranny bolt. holes and cracked my trannt case.. i hope everything will be alright..

As of right now. i have a few broken sensors... and the motor in the car.. now to attach everything. hope i can have the car on the road for the weekend.

PS. i hate shift linkage. and abs.

[F20A CB7]

dam man good progress. DO u think u can take pics, and post so We can c

[93_EXR.]

i'll snap some shots tonight... i'd just really like to get my car back its almost been a week... but thats what you get for fucking the dog all weekend.

[Maple50175]

Fun Stuff, Gotta do a friends swap in a few weeks=) on hids cd5

[93_EXR.]

.. i love wrenching on cars... so thats what i'm going to do now.

Good luck with your friends swap maple.

Hopefully all goes well cuz one thing can change the mood of everything.

[NAiL05]

HOw bad is the crack? Since its housing it shouldnt be bad since all it covers is the clutch disk. If you have broken sensors the ones off the f22a are mostly interchangeable.

[TheNextEpisode]

yeaaaaah!

good stuff man, its pretty fun isn't it? wrapping up the swap isn't hard, just redoing what you undid to get the F out. i hope everything works out for you.

[almostJDM]

woot congrats man, now when you get done rememebr to upload all the pix you took

[93_EXR.]

so its in.....

but i broke the TPS. i work at honda and they say new throtle body.. $400

or get sensor off ebay...???

[91 EX-R]

hey man i was wondering when i was going to see a thread on your swap. where are those pics you said you were going to take? o well, cant wait to see this thing in action. good luck and have fun with that new engine.

[cb9tuner]

yea nice man hope it goes well for you, and I also am starting my swap, lets see them pics!!

[TheNextEpisode]

The tps on my h22 was also broken when i bought it. I just used the one off the f22.

There's a DIY on here that explains how you can use a hacksaw blade to cut a slot on to the rivet-looking bolts on the studs holding the f22 tps and then remove them with a flat head screwdriver.

yeah, here it is. (link)

He used a bolt extractor which works, obviously, but, like I said, you can also just cut a slot on the exposed nut and then use a flat head screwdriver. I can take pics if you've got questions. The f22 tps has been working fine for my h.

[93_EXR.]

well the car runs i'm going to go take some pictures!!

It wasn't starting at first and then i looked at the grounds off the batt. fixxed them up and then turned the key and it started right up

[starchland]

tps are cheap as hell from honda-tech

[lowakkord]

kevin i told you you were gonna beat me man! now get down here and show off!!!