our time has come: ESPnet weld-free 5spd conversion!

[bacal36]

The h22 5spd conversion mount kit.

Ahh I dont think it will work for mine. I talked to ESP and I do have to drill and tap my trans. I have a 5spd already, and its not an auto conversion. Im still getting the mounts though. thanks for your Input!

[Aeromech]

I just ordered the whole mount kit....with the auto to manual conversion mount

just to clarify...errr...muddy things up...

you need to look at your tranny and see if it had the untapped lugs on it because I have a H2A5 tranny from a 90 lx h22a1 and it does have the lugs there that you need to drill and tap. All the info above in this thread says that I shouldn't be able to do this....but it is there on the tranny.

Make sure you physically look at the tranny. This is such a time saver and we will be installing it this weekend.

here is a pic of the tranny...

[Aeromech]

John at ESP is the king of customer service!! Thanks again man...

quick explanation....The powder coater was running long on lead time and John helped me out by getting my parts to me on time.

Happy cb7tuner here!!