H22A4 TB and IM question

[koffin]

I have an H22A4 from a ~00 lude. The intake and throttle body are different than other H22/23 setups I have seen. Can anyone tell me how to hook up the coolant hoses?
Below are 2 pics(not mine but similar) or the throttle body and manifold.
I know what the circle on the top of the throttle body is. What is attached to bottom of the throttle and where do the those coolant hoses connect to?




The manifold pic just also shows the connections and relation to the whole manifold.




Thanks in advance.

[owequitit]

Sorry for not answering your PM!

I have been very busy this last week.

The thing you are referring to is the Fast Idle Valve or FIV.

It basically increases the idle when cold to prevent idle surging, rough running, and to aid faster warm ups.

I know one of those hoses will be connected to the IACV.

I will have to look at the diagrams to see where the other two go, but I think if you reference my plenum swap thread, it should get pointed in the right direction.

The coolant flow patter will be the same, but the mounting locations will probably be a little different.

Here is the link to that thread:

http://www.cb7tuner.com/vbb/showthread.php?t=41175

If that doesn't work, let me know and I will see what I can do from there. Someone else will probably get it answered first though.

[koffin]

Thanks! I think I got it.