Hey guys, my buddy has a H22 swap in his Del Sol. I know it's not an Accord but I figured it would be okay to post here since the motor is what matters, not the car.
Anyways the problem is that the bearings on his JDM distributor bit the dust and the distributor is no good anymore.
He picked up a USDM H22 distributor from the junkyard, found out that JDM distributors have internal and USDM have external, so we went and bought a MSD coil.
What we need to know is which wires to connect to the Positive (+) side of the coil and which to hook to the Negative (-) side of the coil. I have searched and only came up with people using factory coils.
Please advise.
Anyways the problem is that the bearings on his JDM distributor bit the dust and the distributor is no good anymore.
He picked up a USDM H22 distributor from the junkyard, found out that JDM distributors have internal and USDM have external, so we went and bought a MSD coil.
What we need to know is which wires to connect to the Positive (+) side of the coil and which to hook to the Negative (-) side of the coil. I have searched and only came up with people using factory coils.
Please advise.
Comment