f22b non vtec DOHC....

[MA_Fan]

f22a6 distrib. in f22b and f22a6 trans on f22b... computer?? i found the motor for 850 need distrib comp and trans can I use this stuff off my f22a?

[Ricer_X_91]

you can use you tranny and ecu. however your distributor has a different bolt pattern, so it wont bolt on.

as for 850, thats kind of steep. i paid 699 for a motor and tranny, minus ecu.

[PRIMOCB7]

you can use a distributor from a H23 motor. the F22A6 ecu works fine; i was lucky to get a p39 with my F22B. good luck with the motor

[MA_Fan]

well 850 is the cheepest I can find it..... but thank you for your help!!!!


What about wiring?

[Ricer_X_91]

check out ebay, thats where i found mine. as for wiring, for u none since u have iab already. i didnt have to lengthen anything, i was able to make a few stretch but they were fine. anyways good luck!


Jim

[BustedLX]

Originally posted by MA_Fan
well 850 is the cheepest I can find it..... but thank you for your help!!!!


What about wiring?

Do some more looking around, I've found USDM H23A1's for $500 at local salvage yards. I've seen those F22B's going from $500-$750 with "Buy it Now" on eBay so the deals are out there.

[blazen_accord]

For $230 you can get complete engine/tranny and ECU from me.
It an F22A4 with an f22a6 intake manifold and an 93 EX ECU. That A great deal , BUT the catch is it an automatic and local pickup only to heavy to ship. I'm in the east coast, In baltimore Maryland 21222

[phatdoughnut]

or you can use an f22a1 distributor... and a p14 ecu, you just have to rig a knock sensor to it... im sure the f22a6 ecu will work for it..

[MA_Fan]

ok last question I think....

what kinda of internals? pistons and so on..? I want to boost it.. and I figures I would go ahead as build the guts so i can boost when Im ready

[Ricer_X_91]

well the f22b has a 85mm bore same as the f22a so use aftermarket accord pistons and it has the same stroke as a h23/f22a. or u can bore it out to 87mm and basically it will be a h23.