Spark Plug Wires...

[TalontedTSi]

Magnecor, NGK, or MSD? (H22 car)
I have magnecor in my DSM and I love them would not use anything else but this is a honda. Which are best.

[phatdoughnut]

ngk all the way

[pwrusr]

Magnecor, NGK, or MSD? (H22 car)
I have magnecor in my DSM and I love them would not use anything else but this is a honda. Which are best.

NGK is your honda's best friend

[TalontedTSi]

Ok... what do I order... I have the internal distributor on the JDM H22 as of now. As long as it work it stays on the car, when it goes up (hopefully not for a long time) I will replace it with an H22/H23 external since my accord was external. Do I get the external plug wires or internal? Or just prelude plug wires for the H22?

[JDMCB3Si]

I have 11mm Crane cams firewires

[phatdoughnut]

just get the usdm h22 plug wires, keep the spare external coil wire saved.

11mm? that is to big, no need for those... they might end up hurting you at the end.

[JDMCB3Si]

nah cause i stepped down to a degree colder plug so i have more spark and I won't lose any of the current coming in

[LoKo498]

I have a question. Someone pulled out all my spark plug wires under the hood. Is there a diagram to see what wires go where to the distributor. I have a 91 Accord 2 dr auto.
Thanks guys.

[xfactortype1]

ngk is best for most

ngk is best..only upgrade to like msd if your going to high output ignition like msd or crane. honda oem ignition uses resistance wires and plugs to control RFI. so trick is to use only one resistance component. either resistance wires or plugs but dont use both cuz youll loose performance.

check these out.

http://www.ngk.com/powercables.asp

quote taken from an overboost.com article.

"The trick here is to use either plugs or wires with the "R" and not both and not neither. Most imports use resistance wires, so to maximize spark energy, don't use resistance plugs."

[93ACCLUDE]

Nology wires all the way!
MSD No good

[elchulo583]

i'm happy w/ my msd.. look at the sig

[deevergote]

i'm happy w/ my msd.. look at the sig

I'm happy with my NGK wires which used to be your NGK wires

[Nycxeracer]

I know everyone is saying NGK, and although they are great wires, I found my Nology wires to be great. My start-up is usually pretty smooth. Btw, I have heard GREAT things about magnecor...I was thinking about getting a set myself!

[kool92accord]

what about the 11mm Crane cams firewires? are they any good?

[elchulo583]

what about the 11mm Crane cams firewires? are they any good?

i had them on my old motor... they are thick! very nice wire