new swap time, it's about to get real big up in here

[almostJDM]

ok so time to update l list

Engine trans: HAVE
Rear sub frame: on the way
REAR VLSD Diff: on the way
Front end pieces: going to pick them up between the 30th and the 3rd
Rear arms and hubs: need
Rear brakes: need
Front rotors and calipers: need
Front sub frame: need to make Drive shaft: need to order once ending/trans and rear is mounted

[Flatline]

what rear arms do you need son?

[almostJDM]

all of em all both uppers on each side and lower ones, I am just buying the cheapest ones i can find for mock up, and need 5 lug hubs too I am going to see what ones I can use as long as they are 5x114.3

[i-07]

nice man there was a s14 in the jy by me but idk if that would help you

can't wait man

[almostJDM]

it could need the arms off the rear sub fram

[baracuda]

so looks like I will get a VLSD right away from the same guy I am bouying my rear sub frame from , I will be working on the car next weekend but then I won't be for 2 weeks because I am leaving for phoenix on the 28th and wont return until the 4th then gotta work 4 nights then I will have 3 days to work on it, which I hope to get quite a bit done since I will have argon finally for my tig welder and I will have a Gasless mig I am buying from harbor freight since I am only using it to tack together things I am not going with a gas mig, oh also I should be picking up my new front end pieces while i am in phoenix

so what are you doing for the front end? all this talk about "changing" it but "what" are you changing too?

[almostJDM]

I suck at hints haha, guess you'll just have to wait and see when I return home with it in a few weeks

[baracuda]

I suck at hints haha, guess you'll just have to wait and see when I return home with it in a few weeks

lol I guess so, I am going to guess r34 or even 240sx. just because of the swap...Will have to wait and see I guess.

[almostJDM]

lol I'm staying with the accord for the front just a little different, gotta make room for the intercooler you see

[PR CB7]

damnnnnn....... CF4 front end?

excellent choice

[almostJDM]

yes it is, fount the whole front which includes:

HID headlights
HID Fogs
Hood
Front bumper
Fenders
Core support

all for $850 going to pick it up in cali while im down in phoenix next weekend

man I cant wait now that I know where to have the body shop cut the fenders

[Grumpys93]

im liking where this is going.

[almostJDM]

getting ready to throw the rb in for mockup so I can start fab on front sub frame

[almostJDM]

well didn't really get jack done today because I didn't have the right regulator for the argon bottle and every place that sold them was closed so looks like I'll have to wait until the next time I am down here to do work on the front, but the next time I am down here I will have the rear sub frame so I will probably work on that instead, but I do have the engine an trans really close to final position just gotta do the rear to get it exact

[Grumpys93]

well didn't really get jack done today because I didn't have the right regulator for the argon bottle and every place that sold them was closed so looks like I'll have to wait until the next time I am down here to do work on the front, but the next time I am down here I will have the rear sub frame so I will probably work on that instead, but I do have the engine an trans really close to final position just gotta do the rear to get it exact