hole in my block

[blackenwkn]

So I'm almost done putting everything back together but when I'm filling up the anti freeze it leaks on the floor ive found where its leaking from its coming from a hole about the size of a normal thumb maybe a lill bigger lol but its located right above the oil filter and to the right a little id you could please help that would be awesome


the big circle is where the oil fiter goes

[N9netwoAccord]

a hole in your block? its junk... don't even bother trying to repair it

[av6g6]

Not entirely true. Guy around my area had a boosted b16 in a civic, managed to punch a hole through the block. While waiting for a new motor to be built he welded a piece over the hole and ran the motor in a race boosted without any problems.

[psychogat3]

if its coolant leaking from the hole are you sure its a hole or is a freeze out plug missing? do these engines even have freeze out plugs?

[blackenwkn]

should have worded it better its not like a crack im just missing a plug or something it has threads but i have nothing to hook up to it everythings plugged up just added a picture

if its coolant leaking from the hole are you sure its a hole or is a freeze out plug missing? do these engines even have freeze out plugs?

[blackenwkn]

anyone?

[baracuda]

is it an f22a? looks kind like the drain bolt hole.../ or its the hole that goes to a hose that connects an oil cooler sandwhich plate



** i know it may not be same block but its just about the same, and good reference.

[blackenwkn]

is it an f22a? looks kind like the drain bolt hole...

yea it is and thats the only thing i could think of i mean i dont have any hanging wires or anything its a pretty big size hole thou

[baracuda]

yea it is and thats the only thing i could think of i mean i dont have any hanging wires or anything its a pretty big size hole thou

yeah thats it, i would look around maybe find an after market one or used oem....what motor is it?

[blackenwkn]

its an f22a1 if you could find out what goes there you would be awesome lol

yeah thats it, i would look around maybe find an after market one or used oem....what motor is it?

[blackenwkn]

i just saw what you posted and i dont have the oil engine cooler but its the plug where the hose goes to the one thats kinda like a backwards c right below the long tube

[Night Wolf]

engines have removeable plates on holes that are in the rear. its to drain the block. just replace the plate. you push it in, then pull it out sideways

[blackenwkn]

engines have removeable plates on holes that are in the rear. its to drain the block. just replace the plate. you push it in, then pull it out sideways

im not exactly sure what you mean im not very smart when it comes to this stuff but it seem like i just need some sort of plug or somethin because i dont have that engine oil cooler thing if im right what would be the right term so i can research and find out how much this lill bastards gonna cost me

[CB7Man]

Since you have an F22a1 you dont have the oil cooler.
However the hole is still there, except Honda put a screw-in plug.
Sounds like the plug somehow came unscrewed.

Get another screw in plug, either through honda or go to the JY
Your going to need a rather LARGE Allen wrench.

Its pictured as #2
#1 is the oil cooler part that replaces #2 in an F22A6

This is the name
BOLT, SEALING (18MM)
Honda Part #: 11108-PT0-003
Costs about $5-$8 from stealership
Gook luck

[blackenwkn]

Since you have an F22a1 you dont have the oil cooler.
However the hole is still there, except Honda put a screw-in plug.
Sounds like the plug somehow came unscrewed.

Get another screw in plug, either through honda or go to the JY
Your going to need a rather LARGE Allen wrench.

Its pictured as #2
#1 is the oil cooler part that replaces #2 in an F22A6

This is the name
BOLT, SEALING (18MM)
Honda Part #: 11108-PT0-003
Costs about $5-$8 from stealership
Gook luck

i guess that is why they call you the cb7man thank you