ok i am swaping in my h22 on sat and doing a auto to many. i am ussa a h22a with a 94 accord 5 speed tranny. my ?s are can i use my acccord drive shafs. or do i need the 94 accords drive shafs. what motor mounts do i need to use. i no i have to change the rear and tranny one but what ones do i use any thing eles i need to get.
-
Need This In Fo Pleas Help -
i believe that you can use the accord axles should be the same.Comment
-
-
-
-
you need the ESP one for the tranny, or you can drill and tap holes. I just bought their mount kit for like 275 and get an LX/DX rear bracket and everythign lines up. I've got a JDM H22 M2A4 trans though, so be sure you get the right kit for the right trans.
You'll also need an intermediate shaft and a 5spd axle for the drivers side. The pass side you can use the Automatic axle.Last edited by Losiracer2; 08-21-2009, 01:15 AM.
member's ride thread
93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
91 Accord SE 176k
97' Honda Odyssey 199k miles...$485 spare van for my parentsComment
-
-
option 2: custom transmission mount.
This is made from the stock AUTO transmission mount with an adapting plate that i use with my 5spd h22a trans
Comment
-
Or take a ton of washers and built a level to set your mount on while you go look for a better mountComment
Comment