is there a diy on the seatbelt swap

[npor]

has any one used after market seat belts that are safe i know that the swap is unsafe so now for the next qustion.

Yes, people use racing harnesses all the time. There are a number of members on this site who have them. I unfortunately, do not know who those members are.

[Smoken_ducky7]

are the as safe as stock prob a stupid question.

[owequitit]

are the as safe as stock prob a stupid question.

Not even close.

[Smoken_ducky7]

ok thanks

[wed3k]

safer if setup properly.

like used in conjuction with a harness bar via rollcage, proper welds, setup, seat, seat brackets.

[Darkcloud]

I want get rid of my auto belts too, they keep falling me i took it to the dealer 6x before my car went down for the time being. a total of 950 down the drain b'cuz of it. would any one know better way to mount the belts of 92-93 belts i'm thinking welding but don't anyone who welds.

Didn't mean to steal the thread just curious

[CBAccordA4]

I actually attempted this once only because my tan belts were dirty, I was doing an all gray interior swap, and I had access to 1997 V6 gray seatbelts. There is no thread for a 17mm bolt and no passage way for the belts to slide though. It is just not setup to anchor a seatbelt from there. Just deal with it, get a racing harness, or buy a 1992 accord

[civic_90_08]

I put the manual belts in my 90 coupe, that was one of a few things that made it through the wreck that i had in december..

-Jordan

[PointBlank]

I put the manual belts in my 90 coupe, that was one of a few things that made it through the wreck that i had in december..

-Jordan

What kind of wreck was it? Low or high speed impact?

[casterX]

What kind of wreck was it? Low or high speed impact?

i believe it was this car..
http://www.cb7tuner.com/vbb/showthread.php?t=123600

[lost_accord]

yea that's him. here's a fullsize shot of it

[PointBlank]

And didn't he break his pelvis and shit? So how is it relevant to safely swapping in a manual seat belt into a car that wasn't designed for them?

[Smoken_ducky7]

dang how did you do the swap

[93F22A6]

Why do people even want to do this swap? If you don't like them that much get a 92 or 93 CB. Or do what I would do and put in a 4 point roll bar and use a 5 or 4 point harness. No use in risking your life just because you didn't like to wear the seatbelts that cam in the 90 91.

[civic_90_08]

And didn't he break his pelvis and shit? So how is it relevant to safely swapping in a manual seat belt into a car that wasn't designed for them?

Because i did the shit the right way. The seatbelt is still mounted in there. If you want...i can take a pic tomorrow for you..

yeah, i broke my pelvise. but i was just saying that it can be done to where they actually work in a damn wreck, and still hold together.

My broken pelvise didnt have a damn thing to do with my seatbelt swap.