Manual 2 Auto swap (HELP)

[GearBangnAccord]

im currently converting my car to auto my question is the shifter has 3 connectors, my manual car does not do i need an auto dash harness????

Another question different car my manual tranny mount does not line up, weird seems like its foo a few mm.
BTW i just swapped my manual motor into my auto coupe.

[foamypirate]

Everything is covered in the sticky...

[GearBangnAccord]

Everything is covered in the sticky...

no its not this is not an h22 swap its a f22 auto -> f22 manual swap

[YK86]

I misread. You are doing a 5speed to auto conversion? If that is the case, you will need the whole auto engine, cabin and dash harness.

If you are converting to 5 speed, the wiring is covered here:
http://www.cb7tuner.com/vbb/showthre...085#post703946

Regardless of doing a 5 speed to auto or auto to 5 speed, the mount bracket is in a different location so you will need to cut off the old bracket and weld in a new one in the right location or use the auto to 5 speed mount from ESP if that is what you are trying to do.

[veyvey]

your doing manual to auto......? i have everything you need, if you are i will trade you for your many stuff if thats the case straight up...... let me know i have every thing......lllll even the radiator,.

[foamypirate]

no its not this is not an h22 swap its a f22 auto -> f22 manual swap

Yes, I know. It's covered in the Auto to Manual swap guide.
Read it. Learn. Do.

[GearBangnAccord]

Yes, I know. It's covered in the Auto to Manual swap guide.
Read it. Learn. Do.

hmmm well lets see when they are talking auto to manual they miss alot of info involving the auto wiring and such.
So when u give advice that I've already taken into consideration on numerous accounts kno what u are talking bout, cuz i've read that damn thread and there is nothing in there involving making a car auto OK.

[GearBangnAccord]

your doing manual to auto......? i have everything you need, if you are i will trade you for your many stuff if thats the case straight up...... let me know i have every thing......lllll even the radiator,.

sry man i have donor cars plus shipping wud rape us both

[GearBangnAccord]

I misread. You are doing a 5speed to auto conversion? If that is the case, you will need the whole auto engine, cabin and dash harness.

If you are converting to 5 speed, the wiring is covered here:
http://www.cb7tuner.com/vbb/showthre...085#post703946

Regardless of doing a 5 speed to auto or auto to 5 speed, the mount bracket is in a different location so you will need to cut off the old bracket and weld in a new one in the right location or use the auto to 5 speed mount from ESP if that is what you are trying to do.

TY very much for ur help now when u say cabin harness u mean the engine cabin correct i can pull everything from my auto coupe just wwant to verify

[veyvey]

sry man i have donor cars plus shipping wud rape us both

DONOR car im so jealous lol J/K thats cool i gotta get me one....

[foamypirate]

So what are you trying to do? Put a manual trans in an auto car, and the auto back into the previously manual car?


Good luck, bud.

[GearBangnAccord]

So what are you trying to do? Put a manual trans in an auto car, and the auto back into the previously manual car?


Good luck, bud.

Luck is on my side i dont think i need it what i need a a new set of knuckles these ones are done

[J3wman]

so wait nobody asked this question... WHY? Why are you doing manual to auto?

[CB7Man]

1. Practicality
2. Raising the cars value
Theres many more reasons to do it.

[GearBangnAccord]

so wait nobody asked this question... WHY? Why are you doing manual to auto?

well i was doing it to sell the car but its to much work and not enough gain so i opted a different approach now that i got 2 motor sitting on my floor