Prelude power steering line

[Ghetto_CB7]

Hello all, Just making sure that a 93 high pressure power steering line (from any trim) prelude will work for the h22a swap if I keep the h22a power steering pump.

Thank You
Ghetto

[4GAccordH22]

A high pressure line from a 93 Prelude VTEC. Not necessarily from any trim, has to be the same motor (as far as I know). At least that's what I have in MY car and it works!

[4CYLPOWER92]

Differences are probably minor. But with any of them the fit is not perfect, you will have some difficulty putting the metal pan back on...either you have to leave one bolt out, or you have to cut the pan.

[smokeeey420]

some jdm h22a come with a different style ps pump.

[Vtechno]

Hello all, Just making sure that a 93 high pressure power steering line (from any trim) prelude will work for the h22a swap if I keep the h22a power steering pump.

Thank You
Ghetto

any will work. just too make sure, get one from one with an H motor. i.e: Si or Vtec.

[9tAkord]

some jdm h22a come with a different style ps pump.

That's true. I believe I have read somewhere here before that the H22a from a SiR Accord, some of them have a different PS pump that uses a high preasure line from a cd accord. I would wait and see what pump will come from the motor that I am getting before before buying the line...

[ACCORDEX92]

got mine from a 95 lude with h22

[Night Wolf]

get the metal part of the H22 PS line, where it connectes to the PS pump. then get the rest from the accord & connect them together, making a custom PS line

no welding required

[noobcake]

mine is rigged

the accord one and the h22 one are welded together
(pics in ride thread)

but it works

for now

[H23CB7]

yes the si and vtec are the same. And the cd accord line is different but it still has the same style connection as the prelude. (if you happen to get the sir as mentioned above)

[9tAkord]

This is the thread about some JDM H22A from an Accord donor uses the cd/5th gen power steering line. Hope the thread helps...

http://www.cb7tuner.com/vbb/showthre...+steering+line

[4CYLPOWER92]

My ps line came from a F22 Lude. The pump is the same, so it works

[R34Accord]

i had to cut the PS line stock from f22, and weld the h22 ps bracket on the f22 line..see picture...

[4CYLPOWER92]

i had to cut the PS line stock from f22, and weld the h22 ps bracket on the f22 line..see picture...

That must be an OBDII motor if I'm not mistaken. The pump is different than the OBDI one.

[R34Accord]

it sais obd1.. The dude on ebay said it was obd1... so:P