Swaping external coil to internal coil

[Huy009]

right now im in a delima right now as all you guys now im doing a swap now from auto to manual and one cam to two cams right now i have a JDM f22b motor right now and i have a doner car a 91 lx accord (DX) we used the manual harness for the f22b.. then not relizing that the harness is diffrent then the automatic harness from all the diys i see i should have used the automatic harness but leaves out what should i do with the distubitor.. should i converte it into external coil? and use the same harness.. but then agian im not sure how to convert it... aiya... headaches... can some one pppppplease help me

[phatdoughnut]

i should just stick this in my sig, because the h22 swap thread isnt stickied any more, wtf?

Internal/External Coil Issues:
If your car came equipped with an internal coil then the JDM H22 distributor will plug right in no problem. However, if your car had external coil then you will have to modify one plug. The plug you will need to modify is the plug that went to the stock coil. There are is a yellow and a yellow/black wire, splice those 2 wires together. The Black/White wire is useless, don’t worry about it

[oneoffaccord]

my car is a 90 lx i converted it from internal to external. i took the two wires that go to the stock coil to the msd coil works fine. so here come the problem, i just finished puttin in a 93 h23 motor. i understand that that motor is external. and the 90-91 accord are internal. i have no clue how to wire it up. does anybody

[Huy009]

thanks man! soo helpful! i hope everything goes well tomorrow

[oneoffaccord]

i got it wireds up runs fine except that fact that i dont have a knock sensor and im using the h23 ecu so it idles funnny when da car warms up. ill look at the wires for the coil and let u know