SSBC Super Twin Front Big Brake Kit for 90-97 Honda Accord

[XCRN]

Just do ROH, no need for 5 lug unless you want too. Prelude is only single piston. Legend and NSX are the only dual pots that can just simply bolt on.

Get Legend GS Calipers or NSX.
Prelude VTEC rotors.
Prelude or 98-02 Accord V6 brackets.

I do not know what is needed for the 5 lug so I won't comment on that.

[Raf99]

Just do ROH, no need for 5 lug unless you want too. Prelude is only single piston. Legend and NSX are the only dual pots that can just simply bolt on.

Get Legend GS Calipers or NSX.
Prelude VTEC rotors.
Prelude or 98-02 Accord V6 brackets.

I do not know what is needed for the 5 lug so I won't comment on that.

Ya, couldn't one just get something like this?
http://www.ebay.ca/itm/Front-Rear-Re...4580ca&vxp=mtr

[XCRN]

Not really, only the front setup would work and they are single piston in the front. I believe they have different calipers and rotors in the rear.

And those are also for the Non-VTEC models so they are the exact same size and setup as the Accord just ROH.

[illinois_erik]

im planning to use accord wagon brembo rotors (25mm 11.1") wagon brackets (25T) and NSX calipers (NA1) Still staying 4 lug and HOR..

[Raf99]

im planning to use accord wagon brembo rotors (25mm 11.1") wagon brackets (25T) and NSX calipers (NA1) Still staying 4 lug and HOR..

Where are you getting your NSX Calipers ?

[illinois_erik]

Where are you getting your NSX Calipers ?

the intarwebs.

[Raf99]

the intarwebs.

ya, i was looking on the interweeb and wasn't finding these

[XCRN]

If you know a guy around your area with an NSX, for a small fee I can speed up the process of getting it into the junkyard

[H311RA151N]

If you know a guy around your area with an NSX, for a small fee I can speed up the process of getting it into the junkyard

^ I like this guy! ^

[Raf99]

haha...

[illinois_erik]

If you know a guy around your area with an NSX, for a small fee I can speed up the process of getting it into the junkyard

you


haha.

[XCRN]

you

[tommi]

my brake setup is sufficient enough for what i use it for, dont need all that fancy brake ware. works well at the track and street. without braking bank

[af_1132]

When I was first getting into the game, I wanted to make their extreme 4-piston set work:

http://ssbrakes.com/i-10092706-disc-...3in-rotor.html

Totally unnecessary to have 4 pistons and pay that much money, but I like the slotted rotors. I think I would need 17" rims to make those work.

[Raf99]

When I was first getting into the game, I wanted to make their extreme 4-piston set work:

http://ssbrakes.com/c-624171-vehicle...-products.html

Totally unnecessary to have 4 pistons and pay that much money, but I like the slotted rotors. I think I would need 17" rims to make those work.

Those look serious but are they ever lacking style.