NSX caliper swap

[XCRN]

http://www.fastbrakes.com/product_p/accordtsxrl.htm

http://fatfourcustoms.com/newest_pro...7_honda_accord

These are radially-mounted calipers going onto knuckles meant for standard-mount calipers.

That's it.

[Corweena]

Basically what Jarrett said.

In addition to the calipers and FFC brackets, if you are 4-lug, you will need to upgrade to CL ROH front knuckles/hubs. For rotors, you use ones from a '06 Nissan 350Z Track Edition (aka the one with Brembos). You will have to have them re-drilled from 5x114.3 to 4x114.3.

If you are 5-lug, then those rotors are pretty much a direct bolt on...you just need to dremel out the center hub of the rotor a few millimeters, to get it to clear the hub.

Otherwise, everything just bolts together, and is actually a very technically simple swap.