Pierce Motorsports strut bar group buy!

[Lucien]

I'd be game and I'm really digging the second design.

Yeah, the 2-point double bar with dimpled bracing is a great looking piece and super strong.

That was the design i thought most of us would like to have, but Jim said to keep in mind he can fab up pretty much any of the designs that we'd prefer.

[Sequence]

Yeah, the 2-point double bar with dimpled bracing is a great looking piece and super strong.

That was the design i thought most of us would like to have, but Jim said to keep in mind he can fab up pretty much any of the designs that we'd prefer.

<3 damnnnnn time to start thinking up of some designs ahah but yea definitely count me in for the front strut bar!

[Lucien]

<3 damnnnnn time to start thinking up of some designs ahah but yea definitely count me in for the front strut bar!

Will do. First post will be updated.

[AccordWarrior]

The question I would ask for the guys that are swapped, will this clear the H22 valve cover?

I had a Neuspeed bar on mine which I absolutely loved but had I decided to go with the H swap, I wouldn't have been able to run it due to the valve cover. The interference was on the front two legs of the bar which went to the UCA bolts, which wouldn't necessarily be an issue with this bar, but it might be worth trying to find someone local with the H if you don't have one to protype a bar that clears the swap.

[Lucien]

The question I would ask for the guys that are swapped, will this clear the H22 valve cover?

I had a Neuspeed bar on mine which I absolutely loved but had I decided to go with the H swap, I wouldn't have been able to run it due to the valve cover. The interference was on the front two legs of the bar which went to the UCA bolts, which wouldn't necessarily be an issue with this bar, but it might be worth trying to find someone local with the H if you don't have one to protype a bar that clears the swap.

That's a good idea. I'll talk to Jim about it and see if we can't figure something out when he's ready to start fabbing the bars.

Any local h22 owner wanna volunteer?

[owequitit]

The question I would ask for the guys that are swapped, will this clear the H22 valve cover?

I had a Neuspeed bar on mine which I absolutely loved but had I decided to go with the H swap, I wouldn't have been able to run it due to the valve cover. The interference was on the front two legs of the bar which went to the UCA bolts, which wouldn't necessarily be an issue with this bar, but it might be worth trying to find someone local with the H if you don't have one to protype a bar that clears the swap.

That is how I ended up with the ESP bars, which are great BTW. This option would be nice, but given the age of the chassis, I don't know how far into it you would have to get to get a significantly stiffer setup. They look badass though!

[Lucien]

Anyone else want their name added to the in-list for either the front bar or rear 4-point?

[dj_ender]

Jim won't be able to post in this thread until he's out of the beginners section.

[Lucien]

Jim won't be able to post in this thread until he's out of the beginners section.

Is there not a mod approved waiver for companies selling parts?

I thought maybe he could contact Deeve for approval so he could post all the relevant info here.

[dj_ender]

Is there not a mod approved waiver for companies selling parts?

I thought maybe he could contact Deeve for approval so he could post all the relevant info here.

That may be possible, I've never seen it, but that would require you to send Deev a PM.

[owequitit]

Is there not a mod approved waiver for companies selling parts?

I thought maybe he could contact Deeve for approval so he could post all the relevant info here.

What is his user name?

[deevergote]

Just for the record, permission was given for this thread to be made.

[deevergote]

Most of these parts would compete directly with ESP, so I won't allow a Member Shop... unless the ONLY parts offered in that shop are parts that do not compete with ESP.

One of my policies is to never have vendors in the Member Shops area that are competing with each other. We've had a long standing relationship with ESP, and they have continued to take care of my members, so I owe it to them to keep up with my end of things.
I'll allow these parts to be discussed and sold on this site, but there will be no offer for a Member Shop as long as the parts are in direct competition with ESP.

[deevergote]

As for Jim posting outside of the Beginner Forums... rules are rules. If he wants to do business here, he can follow the rules like anyone else. I even made Bisi go through all of that (and by that time, he was already being featured and interviewed in all the import magazines.)

If you choose to act as his representative until he has made 30 legitimate posts, Lucien, I'm ok with that.

[GunRunner]

Interested in the 4point rear.....I will not commit until the design is posted.